When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What I meant was that the BMW looks a little half arsed, it just looks to me like you have all the right ideas in your head but have just rushed through them to get the car complete....as an example look at the doors.
You got the idea to smooth off the handles and sidestrips but to me it looks like you have thrown filler/Mulliput into the bits you wanted filling, scuffed them over with sandpaper and slung some paint on it. Would have taken a matter of minutes to get them spot on, a little more filler and a little more rubbing down to get them 100%.
Small things like that make such a bigger difference to the overall look of a model, with models you cant go down the route of function over form unless your looking at doing a rat look car or banger racer etc.
I dont mean to offend you but I say what I mean, I personally think the Escort looks great!
i can see where your coming from and i didn't rush the bm at all i was on and off with it for over 6 weeks.
might have one floating about but i dont think its got the lamp lenses in it anymore
ahh shite do you think its possible to make the lenses ??
Originally Posted by RAPID 3DR
thanks jim, i dont mind if you copy the splitter
i do think they are the same,just mine are original & i think steve has these,im pretty sure they are its jus the tyre's,ask steve mate.
i just use halfords primer & paint,always been spot on for me
good stuff, might adapt it a little so not the same, then again,,, i might not
ill pm steve about tyres now, you might be right better profile tyre might look well
Here's my escort van, done the doors how they should be and most of the back is almost done just got to do a couple of more things and do a few things near the door and it should be done, the front is being made into a mk4 but unfortunately i broke both front lights taking them out, ive asked roy if he's got any and he's aving a look for me, hope he find some.
that looks sweet as fuck fella!!!!!
i wouldn't have the patience to do something like that
i wouldn't have the patience to do something like that
cheer's mate ive made it a bit higher cause ive seen a couple of these's done at the right level and they look abit like an estate van, they still look good tho.
Here's my escort van, done the doors how they should be and most of the back is almost done just got to do a couple of more things and do a few things near the door and it should be done, the front is being made into a mk4 but unfortunately i broke both front lights taking them out, ive asked roy if he's got any and he's aving a look for me, hope he find some.
if you cant find any lamps why not fill in the lamp apertures and create a quad lamp conversion??
but top work mate i see your even prepping for the little windos behind thee doors
if you cant find any lamps why not fill in the lamp apertures and create a quad lamp conversion??
but top work mate i see your even prepping for the little windos behind thee doors
cheers fella i'll hopefully have the engine fitted tomorrow, then after that all i have to get for it is exhaust, seats, front/ rear spoilers, fit the gauge, color code the interior and fit a sound system.
Well the legend the Petey is, he sent me some parts for my track and bangers cars.
Just tryed the wheels on thr track car.
Dont know whats better, with or without the logo.
I put the wheels off this on the Focus.
i didnt do the van mate fink it was escortnutter if not it was mentalistdave, i got a pic of this up because this has got all the door lines and side pannel lines on.
Well the legend the Petey is, he sent me some parts for my track and bangers cars.
Just tryed the wheels on thr track car.
Dont know whats better, with or without the logo.
I put the wheels off this on the Focus.
they are realy looking good fella the gold subaru wheels on the focus realy set the color of it off and i think you should go with the logo on the tyres.
where do you all get your mk3 escorts from would like a 1/18 scale and try and make a s2 from it- cheaper the better, also found the milliput on ebay how many packs do you use roughly per car
where do you all get your mk3 escorts from would like a 1/18 scale and try and make a s2 from it- cheaper the better, also found the milliput on ebay how many packs do you use roughly per car
i get all mine from ebay as my local modelzone is crap but some of these guys have small model shops near them or there modelzone is better stocked mine lol, you can get a mk3 gl for Ł20 the rs1600i are about Ł35
im not alseep,will be soon tho
i like the cab but the only thing i would take of is the rear xr3 spat,i think it would look better with it off or prob be good idea to get 2 more & put on the front,yeah tey that mate.
take 1 of the other side to see what it would look like
i didnt do the van mate fink it was escortnutter if not it was mentalistdave, i got a pic of this up because this has got all the door lines and side pannel lines on.
i dont care who owns it
i like it but its look me better send it over here
i have a lot off space left in my room
no engine yet but should be here soon and i've also fitted some race seats with harnesses i had to make bases for as they were to low without them pics up later
Well the legend the Petey is, he sent me some parts for my track and bangers cars.
Just tryed the wheels on thr track car.
Dont know whats better, with or without the logo.
I put the wheels off this on the Focus.
you realy cona yunck te escort
wanna trade for somthing else
greeting michel