ht lead fitting order on dizzy doh
#1
PassionFord Post Whore!!
Thread Starter
ht lead fitting order on dizzy doh
cant find anything in my cosworth manuals on wot order they go in
i know the coil is top middle
but if im looking into the dizzy like this is it correct ?
O O O
O O
1 C 3
2 4
or
1 C 4
2 3
or is it the other way round
i know the coil is top middle
but if im looking into the dizzy like this is it correct ?
O O O
O O
1 C 3
2 4
or
1 C 4
2 3
or is it the other way round
#3
Jeebus
iTrader: (1)
Join Date: May 2003
Location: Staffordshire, UK
Posts: 8,663
Likes: 0
Received 0 Likes
on
0 Posts
The firing order is 1 3 4 2 so look at the dizz from the top, you have the coil in correct so put the others in 1 3 4 2 order left to right Ignore them being on different levels imagine them in a line!
Trending Topics
#9
PassionFords Creator
iTrader: (12)
Its just a shame that pictures wrong..
Looking from above with the cap segments pointing to the rear of the engine:
Bottom left = No:2
Bottom Right = No:1
Top left = No:4
Top Right = No:3
Top Center = Coil tower.
She runs clockwise and number 1 on the distributor cap is the inner pickup closest to the throttle position sensor, so imagine from that information that the rotor goes: 1,3,4,2 clockwise and you wont go wrong.
Looking from above with the cap segments pointing to the rear of the engine:
Bottom left = No:2
Bottom Right = No:1
Top left = No:4
Top Right = No:3
Top Center = Coil tower.
She runs clockwise and number 1 on the distributor cap is the inner pickup closest to the throttle position sensor, so imagine from that information that the rotor goes: 1,3,4,2 clockwise and you wont go wrong.
Thread
Thread Starter
Forum
Replies
Last Post