swedish plenum?
#42
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Belfast
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Adam_BlackRS
Alloy,
That........ IMO is the BEST escos in the world
Only spec details i have are in Norwigien....
Eier: Stian Hafsengen. Han har hatt mange Cossier tidligere, blant annet en superstrøken RS500 (tidligere Stig Blomquists). Stian tilbringer mye tid i garasjen, ellers spiller han mye Playstation. Blant gutta - kongen av WRC3! Bygger: Stian har bygget hele bilen fra bunnen av selv, med noe hjelp fra kompiser og bekjente.
Bil: 1997 Ford Escort WRC - Bygget av M Sport Karosseri: Originalt Escort Cosworth-karosseri. Totalt ombygd alle innfestningspunkter fjernet, breddet forskjermer, bakskjermer, hjulhus bak. WRC-vinge, frontfanger, lykter og grill. Interiør: Fremdeles fullt rally-rigget innvendig, kevlar stoler på 2,5kg (merket C. Sainz og A. Schwartz), instrumenteringen gir deg ALT av info, cromollie-bur lakkert i sølv, carbon dørtrekk, flokket dashbord, carbonkasse rundt radiator. Understell: 3-veis justerbart Reiger med Eibach fjærer. Bremser/hjul: AP Racing skiver. Foran: 355mm med 6-pot kalipere. Bak: 315mm med 4-pot kalipere. Hjul: 8,2*19 Speedline Magnesium med Falken 235*35-19. Motor: 2,0l. firesylindret WRC Cosworth. WRC-blokk med nicasil-foringer, long-studs blokk, Fardon Billet veiv, Arrow H-profil råder, JE stempler, Cooper toppakning, 8:1 kompresjon, Piper Cross kammer, portet topp, Kenth kams kamdrev, mekaniske ventilløftere, Titan retainere og doble ventilfjærer, Pectel T6 datasprut, Inconell grenrør, F1 turbo fra Megatron formel 1 bil (Fra M. Schanches gamle RS200), Innovative wastegate, spesiallaget innsug i carbon med 8 dyser og 4” spjellhus, spesiallaget intercooler og radiator, XRP slanger og koblinger, bunnpanne i magnesium. Drivverk: X-track 6 trinns sekvensiell girkasse laget i magnesium, treplatet AP Racing carbonclutch, aktiv senter og frontdiff (8,5” magnesium) 9” bakdiff i magnesium. Takk til: Stor takk til Oslo Autolakk, Jenspeed Engineering, Castrol, Dekkmester’n, ARP-produkter, Gatebil og ellers alle andre som har hjulpet til!
That........ IMO is the BEST escos in the world
Only spec details i have are in Norwigien....
Eier: Stian Hafsengen. Han har hatt mange Cossier tidligere, blant annet en superstrøken RS500 (tidligere Stig Blomquists). Stian tilbringer mye tid i garasjen, ellers spiller han mye Playstation. Blant gutta - kongen av WRC3! Bygger: Stian har bygget hele bilen fra bunnen av selv, med noe hjelp fra kompiser og bekjente.
Bil: 1997 Ford Escort WRC - Bygget av M Sport Karosseri: Originalt Escort Cosworth-karosseri. Totalt ombygd alle innfestningspunkter fjernet, breddet forskjermer, bakskjermer, hjulhus bak. WRC-vinge, frontfanger, lykter og grill. Interiør: Fremdeles fullt rally-rigget innvendig, kevlar stoler på 2,5kg (merket C. Sainz og A. Schwartz), instrumenteringen gir deg ALT av info, cromollie-bur lakkert i sølv, carbon dørtrekk, flokket dashbord, carbonkasse rundt radiator. Understell: 3-veis justerbart Reiger med Eibach fjærer. Bremser/hjul: AP Racing skiver. Foran: 355mm med 6-pot kalipere. Bak: 315mm med 4-pot kalipere. Hjul: 8,2*19 Speedline Magnesium med Falken 235*35-19. Motor: 2,0l. firesylindret WRC Cosworth. WRC-blokk med nicasil-foringer, long-studs blokk, Fardon Billet veiv, Arrow H-profil råder, JE stempler, Cooper toppakning, 8:1 kompresjon, Piper Cross kammer, portet topp, Kenth kams kamdrev, mekaniske ventilløftere, Titan retainere og doble ventilfjærer, Pectel T6 datasprut, Inconell grenrør, F1 turbo fra Megatron formel 1 bil (Fra M. Schanches gamle RS200), Innovative wastegate, spesiallaget innsug i carbon med 8 dyser og 4” spjellhus, spesiallaget intercooler og radiator, XRP slanger og koblinger, bunnpanne i magnesium. Drivverk: X-track 6 trinns sekvensiell girkasse laget i magnesium, treplatet AP Racing carbonclutch, aktiv senter og frontdiff (8,5” magnesium) 9” bakdiff i magnesium. Takk til: Stor takk til Oslo Autolakk, Jenspeed Engineering, Castrol, Dekkmester’n, ARP-produkter, Gatebil og ellers alle andre som har hjulpet til!
#44
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Belfast
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
I translated the spec to English, doesn't make much sense and he doesn't list much on it either. It's supposedly up for sale at the moment.
#53
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Belfast
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
WTF, I didn't even see that! I honestly don't know how I missed that lol. Sorry about that Porkie and thanks - to you too Gareth. Umm, you don't happen to know which year and month by any chance?
#56
Caraholic
iTrader: (3)
Tight git . Just put your hand in your pocket .
Custom inlet manifold capable of exceeding 700bhp. Ideal for use with our 1000cc injectors. The OE inlet manifolds are limited to the following bhp (in the main due to the restrictive elbow NOT the throttle body, which will comfortably flow 650+bhp), 2wd = 430bhp 4x4 = 450bhp EECIV = 500bhp. This manifold removes the restrictive elbow, and due to it's unique design, it has been flow tested and at 2 bar of boost there is only a 2% disparity accross the cylinders. This is considerably better than the OE manifold. The engine MUST be live mapped with this manifold to deal with the extra air at all rpms this can give with the correct turbo. The plenum cover is pressed to it's shape and only welded to the plenum frame. It can be drilled for a standard throttle body or our 3" throttle body. Comes complete with a beautifully crafted throttle bracket (see gallery for picture), plenum gasket and throttle body gasket, bolts for plenum, throttle body and fuel-rail (please state whether 2wd or 4x4 fuel rail when ordering), sealing washer for brown air charge sensor, 1m x 9 mm hose with clamps for vacuum take-off distribution block, connections and vacuum rail with five 4 mm connectors for vaccum and one blank plugg (if only 4 are used).
Even a Welshman like you could avoid the necessary £380 - look at the beautifully crafted throttle bracket it comes with (in the gallery) .
Custom inlet manifold capable of exceeding 700bhp. Ideal for use with our 1000cc injectors. The OE inlet manifolds are limited to the following bhp (in the main due to the restrictive elbow NOT the throttle body, which will comfortably flow 650+bhp), 2wd = 430bhp 4x4 = 450bhp EECIV = 500bhp. This manifold removes the restrictive elbow, and due to it's unique design, it has been flow tested and at 2 bar of boost there is only a 2% disparity accross the cylinders. This is considerably better than the OE manifold. The engine MUST be live mapped with this manifold to deal with the extra air at all rpms this can give with the correct turbo. The plenum cover is pressed to it's shape and only welded to the plenum frame. It can be drilled for a standard throttle body or our 3" throttle body. Comes complete with a beautifully crafted throttle bracket (see gallery for picture), plenum gasket and throttle body gasket, bolts for plenum, throttle body and fuel-rail (please state whether 2wd or 4x4 fuel rail when ordering), sealing washer for brown air charge sensor, 1m x 9 mm hose with clamps for vacuum take-off distribution block, connections and vacuum rail with five 4 mm connectors for vaccum and one blank plugg (if only 4 are used).
Even a Welshman like you could avoid the necessary £380 - look at the beautifully crafted throttle bracket it comes with (in the gallery) .
#64
Originally Posted by sibster
What material are you thinking of making out of Gareth?
#66
Professional Waffler
Thread Starter
sibster,
well i had this drop though my door today never used it before,, but i love giving new things a go,,, an NO mike,, i wont try your idea of a new thing
RichardPON,
doh,, how did i get a rep for bring tight
good idea though
What material are you thinking of making out of Gareth?
well i had this drop though my door today never used it before,, but i love giving new things a go,,, an NO mike,, i wont try your idea of a new thing
RichardPON,
If Gareth's as tight as it would appear, I reckon melted down 2 penny pieces stolen from work
doh,, how did i get a rep for bring tight
good idea though
#68
Professional Waffler
Thread Starter
sibster, reading a book on it at the mo,,,, should be easy ish,,
bugger off im not tight
Is it not cos you squeak wen you walk mate....that's always a give away !!!!
#69
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Belfast
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Gareth, it's a bit harder than you may think, I made a few things out of carbon fibre for my motocross bike and it was a bastard. I still got there in the end, but you will never get a quality finnish like that from the Pro's. Do you have all the equipment you need? Product's like this really do need to be vacuum formed mate.
#70
Professional Waffler
Thread Starter
Alloy, thanks mate
yes mate,,, have most of the stuff i need,, once i finish my model,, its going to be vacuum formed in a place in bridgend,, found them on yell.com
i could of used pre preg,, as i have a auto-clave in work (even though an auto-clave is really the same of the locking mech on the front of a vacuum furnace- little crap fact for you there)
welll see how i get on
yes mate,,, have most of the stuff i need,, once i finish my model,, its going to be vacuum formed in a place in bridgend,, found them on yell.com
i could of used pre preg,, as i have a auto-clave in work (even though an auto-clave is really the same of the locking mech on the front of a vacuum furnace- little crap fact for you there)
welll see how i get on
#71
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Belfast
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Hope all goes well, but be warned, when something turns out good, you WILL want to make everything out of carbon - I even contemplated making my whole YZ125 carbon lol joking.
Serious though, it can be very hard stuff to work with, but it's well worth the effort when it comes out right.
Good luck and keep us informed on your progress please.
Serious though, it can be very hard stuff to work with, but it's well worth the effort when it comes out right.
Good luck and keep us informed on your progress please.
#77
PassionFord Post Whore!!
Join Date: Jun 2003
Location: Saving the planet
Posts: 5,749
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GARETH T
sibster,
well i had this drop though my door today never used it before,, but i love giving new things a go,,, an NO mike,, i wont try your idea of a new thing
RichardPON,
doh,, how did i get a rep for bring tight
good idea though
What material are you thinking of making out of Gareth?
well i had this drop though my door today never used it before,, but i love giving new things a go,,, an NO mike,, i wont try your idea of a new thing
RichardPON,
If Gareth's as tight as it would appear, I reckon melted down 2 penny pieces stolen from work
doh,, how did i get a rep for bring tight
good idea though
#78
1st to 200 without NOS
iTrader: (2)
Originally Posted by RANJ
i got it from sweden, tho i do undertsand its actullay a norwegan or german company that makes them, mines cost approx £3k, the carbon ones are around £2300,
i think you got yours from the same place i got mine! i have looked into having these manifolds re cast and machined. cost would be £1500 each if ten were sold or £3k each if only 5 customers! anyone for a group buy?
#79
PassionBMW.com Member
Join Date: May 2003
Location: UK
Posts: 3,530
Likes: 0
Received 0 Likes
on
0 Posts
I hate it when people accuse others of being "tight" because they wont pay for someone else to build them something, and that they must be "DIY"ers for having a go themselves!
There are a lot of very experianced engineers out there who are more than capable of making an inlet manifold up, and having seen some of Gareth's fabrication on his car, he is one of those, so fairplay for giving it a go
There are a lot of very experianced engineers out there who are more than capable of making an inlet manifold up, and having seen some of Gareth's fabrication on his car, he is one of those, so fairplay for giving it a go