CVH EFi Fuel pressure regulator and MSD chip info needed.
02-12-2014, 12:51 PM
#1
CVH EFi Fuel pressure regulator and MSD chip info needed.
.
I've got an XR3i cabby EFi that I've turbo'd but I've noticed that the blanking cap on the FRST FPR has been removed, Now I have an MSD chipped OFAC ECU, 701's and one of there uprated in tank pumps. I'm sure that I read somewhere that the fuel pressure does not need adjusting for there chip. Can anyone confirm this...
Also am I right in thinking that the 2i, 3i and FRST regulators are all the same, reason being is I still have the original one from the 3i engine with the matching CO pot and throttle body with the FPR still having the adjuster blank in place so I know it's set at factory settings.
Any info helpful
Cheers
Ginger
.
I've got an XR3i cabby EFi that I've turbo'd but I've noticed that the blanking cap on the FRST FPR has been removed, Now I have an MSD chipped OFAC ECU, 701's and one of there uprated in tank pumps. I'm sure that I read somewhere that the fuel pressure does not need adjusting for there chip. Can anyone confirm this...
Also am I right in thinking that the 2i, 3i and FRST regulators are all the same, reason being is I still have the original one from the 3i engine with the matching CO pot and throttle body with the FPR still having the adjuster blank in place so I know it's set at factory settings.
Any info helpful
Cheers
Ginger
.
The following users liked this post:
GINGExR2 T (05-12-2014)
Thread
Thread Starter
Forum
Replies
Last Post
Stu @ M Developments
General Car Related Discussion.
41
21-08-2015 06:47 AM
Zoggon
Ford Sierra/Sapphire/RS500 Cosworth
5
10-08-2015 10:39 AM