mark at bespoke looms warning
#43
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
hard to tell but you can see the old grubby wire.
the state my engine was left in,
rust setting in on areas from being left outside or something.
all cut wires
the oldloom just thrown intoi the boot well including the modules erc
my Ł450 electronic extinguisher is under all that,i havnt looked at it yet to see if that's scratched or damaged.
if I run a business of this type id treat every car like it was made of fragile glass.
pete at demon performance,now that's a guy that treats a customers car as it should be treated.
the state my engine was left in,
rust setting in on areas from being left outside or something.
all cut wires
the oldloom just thrown intoi the boot well including the modules erc
my Ł450 electronic extinguisher is under all that,i havnt looked at it yet to see if that's scratched or damaged.
if I run a business of this type id treat every car like it was made of fragile glass.
pete at demon performance,now that's a guy that treats a customers car as it should be treated.
#44
PassionFord Regular
Join Date: May 2006
Location: Wales
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Obviously left the car out in all weathers to going by the suface rust in there, on the cam pully's, lifting eye etc ..as it had none when we left it and the engine looked better than brand new as had just come off an engine stand from being built and detailed
Last edited by series1rscars; 12-05-2013 at 04:21 PM.
#46
Too many posts.. I need a life!!
That scratch looks deliberate, although could have happened by a careless third party. But I would be inclined to give the engine etc a good check before you fire it up!! Nuts/screws down the plug holes, glue, sand/paint stripper or whatever in the sump. Better to be safe than sorry. Not saying he would do this, but best to check.
#53
Too many posts.. I need a life!!
#54
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
tbh the car as you can see is mid build so its in abit of a shape and was when it was taken but nothing like iv had it back.
I gave it to him mid progress..... I got it back abused and neglected.
I gave it to him mid progress..... I got it back abused and neglected.
#55
Regular Contributor
Join Date: May 2011
Location: somewhere
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
I had a loom off this guy for our 3dr when we come to fit it the fuel pump relay was buzzing the fuel pump was on all the time & it came with no tags on it to say where all the wires went so i sent it back, 3 weeks later i get an email from him saying he would pay the money back into the bank by end of business on friday 10/5 still no money
#57
Too many posts.. I need a life!!
I had a loom off this guy for our 3dr when we come to fit it the fuel pump relay was buzzing the fuel pump was on all the time & it came with no tags on it to say where all the wires went so i sent it back, 3 weeks later i get an email from him saying he would pay the money back into the bank by end of business on friday 10/5 still no money
Bloody hell,sounds like fraser vincent
#58
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
That scratch looks deliberate, although could have happened by a careless third party. But I would be inclined to give the engine etc a good check before you fire it up!! Nuts/screws down the plug holes, glue, sand/paint stripper or whatever in the sump. Better to be safe than sorry. Not saying he would do this, but best to check.
its hard to catch it with the rain but the rear bumper has abrasion marks all over that area and dripping down off the tail onto the bumper is like wet bread gone dry??that's the only way I can describe it tbh.like somethings been put on the car and its rained then its dried out???
the engine will be comimg back out and ill go over the whole car,its bacically back to the start for me now.
#59
Too many posts.. I need a life!!
its hard to catch it with the rain but the rear bumper has abrasion marks all over that area and dripping down off the tail onto the bumper is like wet bread gone dry??that's the only way I can describe it tbh.like somethings been put on the car and its rained then its dried out???
the engine will be coming back out and ill go over the whole car,its basically back to the start for me now.
the engine will be coming back out and ill go over the whole car,its basically back to the start for me now.
#60
I've found that life I needed.. It's HERE!!
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
i feel your pain mate
he priced a full car loom for my mk1 fiesta i dropped the car there, 5 months and lots of lies later, i even dropped in one day he wasnt there and was on the phone to him with him telling me what he'd done as i was looking at the car, he was a tad flustered when i told him i was stood by the car! also was fast to take 700 quid off me and all i was left with was a car full of overspray(some expensive throttle bodies and pro alloy parts) and some shit wiring that went in the bin when i showed gary barker who is now doing the loom! i took it as a lesson learnt and wiped my mouth!
i also had a mate get an engine loom off him and he had to have it modded and the quality was shit! made me look bad!
bad trader so avoid at all costs!!!!
he priced a full car loom for my mk1 fiesta i dropped the car there, 5 months and lots of lies later, i even dropped in one day he wasnt there and was on the phone to him with him telling me what he'd done as i was looking at the car, he was a tad flustered when i told him i was stood by the car! also was fast to take 700 quid off me and all i was left with was a car full of overspray(some expensive throttle bodies and pro alloy parts) and some shit wiring that went in the bin when i showed gary barker who is now doing the loom! i took it as a lesson learnt and wiped my mouth!
i also had a mate get an engine loom off him and he had to have it modded and the quality was shit! made me look bad!
bad trader so avoid at all costs!!!!
Last edited by Davey8oy; 12-05-2013 at 04:57 PM.
#61
I've found that life I needed.. It's HERE!!
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
this was the bullshit i got off him!!! the turning point for me pulling the plug!!!
Morning David,
Right despite my best efforts it’s not going to be finished.
I have 2 lots of parts still outstanding which should of been here last week.
What i propose to do is have you come pick it as as planned and get it back off you once the welding has been done to finish it all off.
Its taken me a lot more time than i expected and cost more in parts than i accounted for, don’t worry your bill is not going up my mistake I quoted you and I will stick to that.
I do need to take some money off you for it before you take it, your outstanding amount is Ł700 of which i would like Ł500 today and then the other Ł200 once it’s finished, I estimate there is 2 full days work left on the car to complete it.
I really do hope that’s ok
Can you call me with an eta please and we can discuss this further if you wish.
All the best
Mark
so to summerise i gave Ł700 and he wanted more money
all i got was a trashed car full of filler dust and overspray and a box of crap wire,cheap fuse box and some fuses and relays!
Morning David,
Right despite my best efforts it’s not going to be finished.
I have 2 lots of parts still outstanding which should of been here last week.
What i propose to do is have you come pick it as as planned and get it back off you once the welding has been done to finish it all off.
Its taken me a lot more time than i expected and cost more in parts than i accounted for, don’t worry your bill is not going up my mistake I quoted you and I will stick to that.
I do need to take some money off you for it before you take it, your outstanding amount is Ł700 of which i would like Ł500 today and then the other Ł200 once it’s finished, I estimate there is 2 full days work left on the car to complete it.
I really do hope that’s ok
Can you call me with an eta please and we can discuss this further if you wish.
All the best
Mark
so to summerise i gave Ł700 and he wanted more money
all i got was a trashed car full of filler dust and overspray and a box of crap wire,cheap fuse box and some fuses and relays!
Last edited by Davey8oy; 12-05-2013 at 04:57 PM.
#62
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
i feel your pain mate
he priced a full car loom for my mk1 fiesta i dropped the car there, 5 months and lots of lies later, i even dropped in one day he wasnt there and was on the phone to him with him telling me what he'd done as i was looking at the car, he was a tad flustered when i told him i was stood by the car! also was fast to take 750 quid off me and all i was left with was a car full of overspray(some expensive throttle bodies and pro alloy parts) and some shit wiring that went in the bin when i showed gary barker who is now doing the loom! i took it as a lesson learnt and wiped my mouth!
i also had a mate get an engine loom off him and he had to have it modded and the quality was shit! made me look bad!
bad trader so avoid at all costs!!!!
he priced a full car loom for my mk1 fiesta i dropped the car there, 5 months and lots of lies later, i even dropped in one day he wasnt there and was on the phone to him with him telling me what he'd done as i was looking at the car, he was a tad flustered when i told him i was stood by the car! also was fast to take 750 quid off me and all i was left with was a car full of overspray(some expensive throttle bodies and pro alloy parts) and some shit wiring that went in the bin when i showed gary barker who is now doing the loom! i took it as a lesson learnt and wiped my mouth!
i also had a mate get an engine loom off him and he had to have it modded and the quality was shit! made me look bad!
bad trader so avoid at all costs!!!!
I also had phone calls with him saying hes really getting on well and then weeks later he would admit he hadn't even started
could you pm me details on gary barker??is this the guy the done the loomin mks stunning jwrc cossie fezza??
#63
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
this was the bullshit i got off him!!! the turning point for me pulling the plug!!!
Morning David,
Right despite my best efforts its not going to be finished.
I have 2 lots of parts still outstanding which should of been here last week.
What i propose to do is have you come pick it as as planned and get it back off you once the welding has been done to finish it all off.
Its taken me a lot more time than i expected and cost more in parts than i accounted for, dont worry your bill is not going up my mistake I quoted you and I will stick to that.
I do need to take some money off you for it before you take it, your outstanding amount is Ł700 of which i would like Ł500 today and then the other Ł200 once its finished, I estimate there is 2 full days work left on the car to complete it.
I really do hope thats ok
Can you call me with an eta please and we can discuss this further if you wish.
All the best
Mark
so to summerise i gave Ł700 and he wanted more money
all i got was a trashed car full of filler dust and overspray and a box of crap wire,cheap fuse box and some fuses and relays!
Morning David,
Right despite my best efforts its not going to be finished.
I have 2 lots of parts still outstanding which should of been here last week.
What i propose to do is have you come pick it as as planned and get it back off you once the welding has been done to finish it all off.
Its taken me a lot more time than i expected and cost more in parts than i accounted for, dont worry your bill is not going up my mistake I quoted you and I will stick to that.
I do need to take some money off you for it before you take it, your outstanding amount is Ł700 of which i would like Ł500 today and then the other Ł200 once its finished, I estimate there is 2 full days work left on the car to complete it.
I really do hope thats ok
Can you call me with an eta please and we can discuss this further if you wish.
All the best
Mark
so to summerise i gave Ł700 and he wanted more money
all i got was a trashed car full of filler dust and overspray and a box of crap wire,cheap fuse box and some fuses and relays!
its like my experience all over again!!!!!unreal:shocke d:
I made the mistake of paying him nearly all the money upfront when the car was dropped off.he calledme up two weeks ago saying come and get your car your money is here, foolishly asked him to continue but then after talking to trusted family,two days later I decided it was best to get the car home ,when I called to say id changed my mind id like to bring the car home he told me he had spend Ł700 of the money and I would have to wait for him to try and source it.
a week later I was able to pick the car up.
then was treated like my first post
#64
I've found that life I needed.. It's HERE!!
Join Date: Dec 2004
Location: canvey island
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
yeah thats the bloke mate(gary barker) hes done my engine loom for me and in process of doing car loom
he is a busy man and doesnt do car storage but best you speak to him
plus gary uses dr25 spec wiring which is the top stuff
you tried will pedley he must be closer to you
he is a busy man and doesnt do car storage but best you speak to him
plus gary uses dr25 spec wiring which is the top stuff
you tried will pedley he must be closer to you
Last edited by Davey8oy; 12-05-2013 at 05:09 PM.
#65
Advanced PassionFord User
really sorry to hear this mate , I hate it when people wreck other peoples pride and joy .
what a fucking arsehole and soon as he put his hands on you , you should of battered him.
well lets hope these lads are hanging there heads in shame
don't give up mate and I hope you have good luck in the future
cheers paul
what a fucking arsehole and soon as he put his hands on you , you should of battered him.
well lets hope these lads are hanging there heads in shame
don't give up mate and I hope you have good luck in the future
cheers paul
#66
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
yeah thats the bloke mate(gary barker) hes done my engine loom for me and in process of doing car loom
he is a busy man and doesnt do car storage but best you speak to him
plus gary uses dr25 spec wiring which is the top stuff
you tried will pedley he must be closer to you
he is a busy man and doesnt do car storage but best you speak to him
plus gary uses dr25 spec wiring which is the top stuff
you tried will pedley he must be closer to you
a Raychem loom is originally what I wanted see but mark wasn't keene on doing it,glad I didn't ask for it now or I may have had big problems getting the larger amount of money back.
will pedley is a option I have pencilled down mate yea.
iv seen garys loom on mks thread and the pictures do the talking,its clear hes a professional.
ill gather info over coming weeks/months and go from there.
#67
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
really sorry to hear this mate , I hate it when people wreck other peoples pride and joy .
what a fucking arsehole and soon as he put his hands on you , you should of battered him.
well lets hope these lads are hanging there heads in shame
don't give up mate and I hope you have good luck in the future
cheers paul
what a fucking arsehole and soon as he put his hands on you , you should of battered him.
well lets hope these lads are hanging there heads in shame
don't give up mate and I hope you have good luck in the future
cheers paul
#68
competant bodger
iTrader: (2)
if i was you i would use will pedley you will get nothing but 110% from will i will guarantee it, he is a top top lad
shame to hear of what has happened i dont know the lads involved personally but have had banter with steve on here and he seems like a real sound guy, he could have just been backing his brother up as any brother would, you dont know what his brother has told him to get him to act that way
shame to hear of what has happened i dont know the lads involved personally but have had banter with steve on here and he seems like a real sound guy, he could have just been backing his brother up as any brother would, you dont know what his brother has told him to get him to act that way
#69
I'm Finding My Feet Here Now
Thread Starter
Join Date: Jul 2011
Location: south wales
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
if i was you i would use will pedley you will get nothing but 110% from will i will guarantee it, he is a top top lad
shame to hear of what has happened i dont know the lads involved personally but have had banter with steve on here and he seems like a real sound guy, he could have just been backing his brother up as any brother would, you dont know what his brother has told him to get him to act that way
shame to hear of what has happened i dont know the lads involved personally but have had banter with steve on here and he seems like a real sound guy, he could have just been backing his brother up as any brother would, you dont know what his brother has told him to get him to act that way
think youv hit the nail on the head tbh,i think mark has filled his head with bull and hes acted on false information.shame on mark if that's the case.
I would walk into a 1000 men alone if I was in the wrong and id tell me brother not to even be there.spineless mark
#71
PassionFord Post Troll
iTrader: (3)
Join Date: Jan 2005
Location: Bristol/Bath
Posts: 2,568
Likes: 0
Received 0 Likes
on
0 Posts
Shocking to read that mate, and as for that Cossie 4i bloke......seen hundreds of threads from him on here and never came across like that so what a total and utter prick trying to intimidate you like that, always looks a big soft fucker to me tbh and definitely not up to those sort of scare tactics
Hate reading things like this where people get ripped off and worse by so called professionals, and happens far too often. Puts you off trusting anyone, why on earth do people advertise a service they aren't capable of delivering and then get nasty when they're found out?
I've rarely had good experiences with so called 'specialists' that i've read about on forums or in magazines etc.
Hope you get someone decent on the case to sort it for you
Hate reading things like this where people get ripped off and worse by so called professionals, and happens far too often. Puts you off trusting anyone, why on earth do people advertise a service they aren't capable of delivering and then get nasty when they're found out?
I've rarely had good experiences with so called 'specialists' that i've read about on forums or in magazines etc.
Hope you get someone decent on the case to sort it for you
#73
PassionFord Post Whore!!
The problem with this is that everyone will back that cossie4i bloke up cause he is well known on here even if him and his brother are a right pair of cunts people will still defend them.
#75
Happily retired
#79
PassionFord Regular
Join Date: May 2006
Location: Wales
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Ive been more scared of my nan Rod .. he expected us to be worried by him, and when that didnt work he didnt know what to do....when it came to it he had nothing to bring to the table just a wierd smirk ... total joker
Last edited by series1rscars; 12-05-2013 at 06:06 PM.
#80
Zee Germans are coming
I'd be jumping up and down on people's car roofs if that happened to me
I would not be happy
Think some people need to answer to what's happened to you mate imho
I would not be happy
Think some people need to answer to what's happened to you mate imho