Rippers

Mk3 doors the same as Mk4?? I need a new passenger door and been offered a S2 door? YES or NO

tonyturbo

yes the same. needs a bit of a fettle where interior door handle goes but easy enough.

BillyCabrio

iTrader: (1)

Nearly, same outer skin - inner skin is different.

IMO i wouldn't bother, wait for a mk3 door mate.

Ginge !

not the same , the inner need moding for the handle

can be done if ya fancy a challenge

Ryan

no

Locking Latch is different hole pattern.
Inner skin is different

tonyturbo

its easy enough to modify . you need a bit of flatbar about 50mm long to hold the handle in position.
once the door card is on you cant tell.
mk3 doors are hard to get now. its not rocket science to make it work.......

Ryan

door locking is also different tony

BillyCabrio

iTrader: (1)

No not rocket science, just hassle.

Or buy a normal door and weld some extra sheet metal along the B piler side of the door, thus making the door look wider.

If you fancy a challenge go for it Paul Ripley

Rippers

Cheers guys, I'll leave them and wait for a mk3 door, got enough stuff to modify without doing a door

tonyturbo

the locking etc will swap straight over so i wouldnt class that as a problem. is if your a lazy coont.

Rs Baz

paul im still waiting for info on that shell for you the lad that has it has
got loads of mark 3 escort turbo parts, for a matter of fact im sure he has
2 other s1 for breaking, will be in touch asap