Can you still buy NEW Dyno Dynamics Rolling Roads?
#2
Yes stu you can, it was only the holding company that went bust.
Dyno dynamics are still very much trading and in fact still developing new products as well.
If you search you will find a thread on here from me asking the same question, and I have spoke to them since then.
Dyno dynamics are still very much trading and in fact still developing new products as well.
If you search you will find a thread on here from me asking the same question, and I have spoke to them since then.
#5
#7
Trending Topics
#12
#13
Thread Starter
PassionFords Creator
iTrader: (12)
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
Been considering it for years mate, but units round here to put one in are bloody scarce, however, one is looking likely to pop up on our ind est very soon so am potentially back in the market for one.
#14
Good plan Stu Noise can be an issue with neighbours, lucky for me I'm ok on that front. Mines all paid for on Thursday, good feeling that.
#15
That will be awesome!! i suppose you could develop even more maps for more cars too.??
Im hoping to get a nissan gtr by the end of the year and would deffo consider letting you have that for a while to get the best from it??
cheers danny
#16
#17
The only problem I see is the long term future of owning one with the financial problem they have had,
I would be looking poss at a superflow if I needed to buy one today, Luckly for me I have very good access to a DD Dyno so no need to buy one for me.
Mark
I would be looking poss at a superflow if I needed to buy one today, Luckly for me I have very good access to a DD Dyno so no need to buy one for me.
Mark
#18
As you say though if you can use someone elses when needed then no need to go buy a massive expensive bit of kit..
cheers danny
#19
Yeah mega feeling!! Was chatting with the wife last night and mentioned that it was all paid up on Thurday and she informed me that its not the 21st it's the 20th, so today its sorted!
Are you refering to that with regards to the future supply of parts and maintenance? If so I don't see it as an issue, they're quite simple when it comes down to it, we had a strap pull into the rear retarder breaking all the bearings, damaging a bearing flange and pulling everything out of line. I didnt need to buy any parts off DD, bought the original bearings and carriers (same make and spec) from a bearing supplier, had a new flange made locally and had the retarder balanced by our balancers and then built it all back up myself. Mike G has a wealth of knowledge and is always on hand if needed.
Are you refering to that with regards to the future supply of parts and maintenance? If so I don't see it as an issue, they're quite simple when it comes down to it, we had a strap pull into the rear retarder breaking all the bearings, damaging a bearing flange and pulling everything out of line. I didnt need to buy any parts off DD, bought the original bearings and carriers (same make and spec) from a bearing supplier, had a new flange made locally and had the retarder balanced by our balancers and then built it all back up myself. Mike G has a wealth of knowledge and is always on hand if needed.
Last edited by Martin-Hadland; 20-06-2012 at 07:47 AM.
#21
Thread Starter
PassionFords Creator
iTrader: (12)
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
No thanks, got the new 2012 updated one now.
That said, I know someone who might, so drop me the details to sales@remapping.co.uk
That said, I know someone who might, so drop me the details to sales@remapping.co.uk
Last edited by Stu @ M Developments; 04-10-2012 at 12:21 PM.
#22
stu did you see my question on your other thread about your new RR?
how much will it cost to have a car that has 1 of your chips already fitted, setup on the rollers, basically just a health check and to make sure the chips ok, and if not adjust it accordingly, but not a full live map?
how much will it cost to have a car that has 1 of your chips already fitted, setup on the rollers, basically just a health check and to make sure the chips ok, and if not adjust it accordingly, but not a full live map?
#23
Thread Starter
PassionFords Creator
iTrader: (12)
Joined: May 2003
Posts: 28,824
Likes: 95
From: Blackpool, UK Destination: Rev limiter
stu did you see my question on your other thread about your new RR?
how much will it cost to have a car that has 1 of your chips already fitted, setup on the rollers, basically just a health check and to make sure the chips ok, and if not adjust it accordingly, but not a full live map?
how much will it cost to have a car that has 1 of your chips already fitted, setup on the rollers, basically just a health check and to make sure the chips ok, and if not adjust it accordingly, but not a full live map?
Sorry mate.
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford Focus RS Parts for Sale.
5
09-03-2016 01:03 PM
Focosmitch
Ford RS Cosworth Parts for Sale
5
03-11-2015 04:08 PM