tiger stripes help vector image needed
30-05-2012, 12:39 PM
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
tiger stripes help vector image needed
Hi hot an old vinyl cutter and a bit of old vinyl left and fancied doing some ford motorsport tiger stripes. Trying to get hold of the eps vector image for the stripes but not having a lot of luck. Prepared to pay a few quid for it if anyone can help it is only for personal use cheers in advance 
30-05-2012, 01:30 PM
#4
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Very kind offer. But i need the eps/vector image to put into my cutter programme to get the stripes. Thanks for your reply and offer
30-05-2012, 01:57 PM
#5
http://www.dmb.uk.com/prod/752/unive...-zebra-stripes
If you get the data, can you forward it to me? I would like to try tiger stripes too...
If you get the data, can you forward it to me? I would like to try tiger stripes too...
Last edited by DaveCrack; 30-05-2012 at 02:07 PM.
Trending Topics
30-05-2012, 03:32 PM
#8
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
I know thats where im struggling to get the shapes right. Cant seem to get it too look right. I could pay for a set but would like to do it myself and perhaps get the satisfaction out of knowing that I did that
30-05-2012, 03:52 PM
#9
Too many posts.. I need a life!!
why cant you import a car from impact vehicle outline disk,
That way they will be to size aswe, llthen just draw them in your sign software against the outline.
easy mate,
That way they will be to size aswe, llthen just draw them in your sign software against the outline.
easy mate,
30-05-2012, 06:16 PM
#11
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Just want to be a little different and possibly try an old style on a newer car. What was the Hexagan design that was out just after the tiger stripes anyone with any pictures ???
30-05-2012, 08:58 PM
#15
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Well vinyl is coming tomorrow so suppose ill have to just give it ago. In the past i have done van and shop signs this i am really finding a challenge to get to look right
31-05-2012, 08:20 AM
#20
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
31-05-2012, 08:21 AM
#21
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
31-05-2012, 12:51 PM
#38
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Starting to give up now. I have put a plain pic on the site now so if anyone can help by putting a few stripes on it people that are more adapt at coral draw then me that would be appreciated
31-05-2012, 01:05 PM
#40
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Apr 2012
Location: shrewsbury
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
only did a few vans and shops going back a bit thats why I thought id dust the cutter offer and try this. Never done anything like this before only lettering then it was only for friends and family So not really done that much and yes im s h i t lol
So not really done that much and yes im s h i t lol
