for a saph cossie. what are my options and where from?

 

Mark at MK motorsport on here does them or Compbrake mate

 

heard bad things about compbrake so im abit wary about using them .

As for MK, well he didnt reply to my last message a couple of days ago.

so, open to other options lol

 

comp brake do a lot of crap but there top mounts are quiet good .try rainbum
or ebay
http://www.ebay.co.uk/itm/Alloy-Adju...1#ht_773wt_700

demon theives
http://www.demon-tweeks.co.uk/Motors...unts/2019/6295

 

Ebay one above ^^^^^^ dont do cossie ones i messaged him before i bought from compbrake

 

they all got the same outside diameter so its only a matter of getting the right size sleeve nut to suit .

there the same ones that Miller3 are using on his sapphire.

 

Mike "the 70's throwback" rainbird does them mate

 

i havent got Ł450 to spend on topmounts at the moment realy. so looks like im aiming for the eccentric type

 

hi only ones i have at the minute are wrc ones

thanks mark

 

price and pictures please Mark as i have no idea what they are like

 

here you go

 

cheers Andy.

do the make the strut sit much lower?

i take it the top of the turret needs the snip

 

i have compbrakes ones on mine seem ok but never tested them yet

 

the comp brake ones make the strut sit lower by around 30-40mm dependant on if you fit them above or below the welded in ring .
the wrc ones make the strut sit higher up in the body but im not sure by how much .
this is my top mount i will be fitting the mounts to the top bolting into the ring i welded in


or you could do it this way which was my old set up

 

nice engine bay, what power does it make?

 

702BHP

 

the wrc ones give better suspenion travel, to cut the suspenion tops to fit compbrake ones does away with so many mm of suspenion travel, so i think is not good.

thanks steven

 

serious piece of kit. drysumped, tibuc inlet
lots of money there