24v injector problem
#1
I've found that life I needed.. It's HERE!!
Thread Starter
24v injector problem
Ive got my 24v cozzy all in and redy to start but it wont. Ive had alot of help from ade500 but im still abit lost so anythink els to chech would be good. It terns over fine and the spark is mint. Ive got fuel pressure but no pops,bangs, abslotley nothink. I checked the fuel rail bleed valve and fule squirted out so its ovysley getting to the injectord just not past them. The inlet nor exhaust smell of fuel atal. Anyone that maybe able to shed some light would be aswome.
CheRS
CheRS
#2
Regular Contributor
iTrader: (1)
Join Date: Oct 2008
Location: Cambridgeshire
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
try a different ECU on it, it is very easy to burn out the injector drivers in these. Check you havent trapped any of the injector wires between the plenum and the inlets. Very easy to do and burns the ECU out.
#4
Regular Contributor
iTrader: (1)
Join Date: Oct 2008
Location: Cambridgeshire
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
yes it would still turn that on. Im talking about the injector drivers that actually tell the injectors to open. I caught one of the wires in the inlet once, went to start and burned out one of the injector drivers, only 1 bank of injectors would fire. Replaced wiring and ecu had no problems after that
Thread
Thread Starter
Forum
Replies
Last Post
DixieTheKid
Ford Sierra/Sapphire/RS500 Cosworth
11
06-06-2020 11:20 AM