xr4x4rs

iTrader: (5)

are there any owners here that are running an 8x18 wheel with an offset of et 30

as i carnt get an et35 but can get et30, if so have you had any problems and have youg ot any pics, what mods did you have to do to fit them, roll arches?

xr_craig

iTrader: (2)

Rear will be fine front will definitely need the arches rolled and will probably still catch

Twellsie

iTrader: (1)

what width, as on a 7" rim you should be fine

xr4x4rs

iTrader: (5)

8x18 mate

CozzyKing

iTrader: (2)

I'm running 8x18" on my P100 and have had to have the fronts rolled and slightly stretched with coilovers on a 65mm drop.
Cost me £40 to have the arches sorted so not a massive expense to be fair and for the look it's definitely worth doing.

xr4x4rs

iTrader: (5)

p100 is 2wd so an et25 will fit on yours lol

4wd have a wider front track

Tev

iTrader: (2)

yes

CozzyKing

iTrader: (2)

My P100 has 4x4 x member, tca's, arb and steering rack with 4x4 cosworth coilovers so no I won't get et25 on, I had some serious hed scratching before I decided to get the arches done.
I will try to get some pictures up of the truck up but having problems with my phone uploading pictures to my laptop at the moment.

xr4x4rs

iTrader: (5)

what offset are they though

CozzyKing

iTrader: (2)

et30 mate.
They're KEI racing wheels for a skyline.

Ade

They'll go on fine. Escos rims are 8J ET25 and they go on no probs.
The rolling radius will only be slightly more with them being 18s

xr4x4rs

iTrader: (5)

but escos rims are 16 inch not 18

i just dont want a lot of hassle in rolling my arches as the car has just been painted

if i had the money i go comps but there almost 1k just for wheels

revolution mileniums arnt a bad price but only et30

looks like ill be going some after market alloys with an et42 at this rate

CozzyKing

iTrader: (2)

If you have fresh paint on it mate you should have no worries about the paint cracking when the arches are rolled, mine didn't and that was on 6 year old paint.

749steve

iTrader: (1)

i had my revies machined 5mm on my saph it only cost 25 quid a wheel

cossypaul

iTrader: (2)

ive got these rims on my cos 4x4 rolled the front arches and they are fine also running on koni shocks here is a pic

yellowsierra

Ditto mate

I had mine done too and with the arches rolled as well all is good

Ade

As I said, the rolling radius is practically the same if you fit the right tyres.
18" wheels aren't 2" taller than 16" wheels in reality when tyres are fitted

ET42 is horribly skinny