When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My 3dr on the rollers... What will it make??? update 25/04/10
General Car Related Discussion.To discuss anything that is related to cars and automotive technology that doesnt naturally fit into another forum catagory.
My 3dr on the rollers... What will it make??? update 25/04/10
As said my 3dr cosworth is going into REYLAND this week (14/04/10) and i thought i would start a post to see what you lot think it will make when martin gets it all set up and mapped. The spec of the car is as follows:
205 block
4x4 pistons 1st over size with valve pockits
Crank/rods/pistons/fly wheel have all been balanced
Polished ports in the head
Double valve springs
bd14 inlet cam standard ex
Vernia pulleys
Head size 1st skim
WRC multilayer head gaskget
Swedish plenum
Black 55 siemen injectors
L6 ECU
Wastespark
T34 turbo 0.48
RS500 cooler
Standard air box with K&N filter
TIAL BOV
Bosch 044 pump
The chip will be done by martin to suit the car
BLUE = BHP RED = LB (TORQUE)
R4N S S ...........................360
stu21t...............................370/380
tomoyb.............................330/350
jumbo...............................382/374
1374lee.............................350
martysmartie......................330/350
RAX..................................360/370
b19 dfp.............................375
james kiely........................365bhp/300lb
beefy................................371
andy130.......................... .375-390
badboyrs......................... .367/367
cossie4i.............................380/380
pete 3dr ...........................361/358
ryan..................................348/360
scooby slayer ....................350/350
cossie rich.........................355/362
gingerturbo........................375/380
s1 john s1..........................345
cossiedavedree...................375/360
cossiegreg1........................600 lol
norubnodub........................890,000,987
less...................................354/326
t3ora.................................220 lol
wongrs..............................387/362
tomcortina.........................385/360
richardcaine.......................330/350
jimbo................................386/364
rs nissan............................344/380
rs mat...............................380/360
ksa-cossie.........................379/389
ginge................................372/395
andyescos.........................373
t4 and greys......................386/394
Last edited by COLEYST200; 25-04-2010 at 10:19 AM.
What compression r u on m8 and it also depends what sort of boost it's going to be set at.
I'm gonna say around 350bhp with the turbo you have and the .48 ex housing.
CheeRS.Lee.
What compression r u on m8 and it also depends what sort of boost it's going to be set at.
I'm gonna say around 350bhp with the turbo you have and the .48 ex housing.
CheeRS.Lee.
out of the box on the compression mate and the car has been running 28psi up till now
Just to throw a spanner in the works my motor is the same spec as my mate escort cosworth apart from the rear of the turbo which he has the big one and he made 409BHP 6. weeks back on the same rollers
11-04-2010, 10:07 PM
My 3dr on the rollers... What will it make??? update 25/04/10
new guess is around 360 then
,no seriously I dont.
