Missfire! HELP!
#41
20K+ Super Poster.
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Don't assume throwing money as a "shit" ignition system will improve it, they were so shit they were only used a few years, weren't they ??????
Coilpacks came about due to COST, nothing else.
tabetha
Coilpacks came about due to COST, nothing else.
tabetha
#44
BANNED
BANNED
Thread Starter
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well boys, since I've changed the plugs I can rule the ignition out, so no need to bash the ignition anymore
It's a little more serious than that at this point. Tested resistance from all angles on the loom, and it doesn't look good with the current ECU fitted, the figures I was getting weren't there before. Will know more once the test ECU arrives.
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Last edited by COCHYN; 29-01-2010 at 08:25 PM.
#46
BANNED
BANNED
Thread Starter
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I dunno, but getting an identical ECU to test and Wenny's sending me a spare 3bar sensor to see if there's any difference. Can't think what else it could be, not considering where its been for the past 3 weeks!
#51
I've found that life I needed.. It's HERE!!
iTrader: (3)
Join Date: Jun 2008
Location: north wales
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
what were ur voltage's at on the injectors and all power points they should be around 13.6 and also what leads u using if you test ur leads they should be around the 18000 mark i bought some new leads for mine had a misfire so tested the leads and they were only 8000 when they should have been 18000 or around that
#52
BANNED
BANNED
Thread Starter
Join Date: Jan 2005
Location: North Wales....Congleton now though!
Posts: 9,757
Likes: 0
Received 1 Like
on
1 Post
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thought 3rd injector didn't read very well on multimeter. ECU shagged, sourced another for a £100. One I borrowed from a lad on here worked perfectly. Injector board probably blown on mine. But all working now, so pics coming, look at my project thread
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Thread
Thread Starter
Forum
Replies
Last Post
Ginge !
General Car Related Discussion.
23
28-05-2005 01:06 PM