where to get shortened number plates made?
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Oct 2004
Location: Ambergate,Derbyshire
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
where to get shortened number plates made?
Got a number plate for my birthday, nothing too fancy just a 5 digit number with my innitals on it and im wanting to get a smaller plate made up for it.
now i'm wanting legal size letters and spacing so thats ok, but im wanting the plate to be actually shorter.
i've seen places that will make you these with a boarder round which is what im after hence why im not wanting to just buy one and cut it down myself (which i will do if i dont succeed with finding somewhere to make me one with a boarder!)
any ideas? i remember seeing it on the net once when i was ordering old plate but i cant remember who it was with!
Dunc
now i'm wanting legal size letters and spacing so thats ok, but im wanting the plate to be actually shorter.
i've seen places that will make you these with a boarder round which is what im after hence why im not wanting to just buy one and cut it down myself (which i will do if i dont succeed with finding somewhere to make me one with a boarder!)
any ideas? i remember seeing it on the net once when i was ordering old plate but i cant remember who it was with!
Dunc
#2
Wahay!! I've lost my Virginity!!
Join Date: May 2009
Location: west yorkshire
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
#3
Advanced PassionFord User
#5
Too many posts.. I need a life!!
Thread Starter
Join Date: Oct 2004
Location: Ambergate,Derbyshire
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
put that in and 1,000,000,000 results come up lol
Jimbo, they look good! what size widthways are those? 112mm is the legal height i know, but whats the width?
520mm wide are standard plates, i need to know what the shortest i can go is with the standard height letters and correct spacing with a 5 digit number
cheers
Dunc
Jimbo, they look good! what size widthways are those? 112mm is the legal height i know, but whats the width?
520mm wide are standard plates, i need to know what the shortest i can go is with the standard height letters and correct spacing with a 5 digit number
cheers
Dunc
#7
Too many posts.. I need a life!!
Thread Starter
Join Date: Oct 2004
Location: Ambergate,Derbyshire
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
PassionFord Post Whore!!
iTrader: (1)
Join Date: Oct 2005
Location: Liverpool
Posts: 5,016
Likes: 0
Received 0 Likes
on
0 Posts
On that site though there is loads of different sizes?
What sizes would i put in for a standard lettering size just basically cut down, like yours Jimbo? Only mine is a 5 digit plate....
What sizes would i put in for a standard lettering size just basically cut down, like yours Jimbo? Only mine is a 5 digit plate....
#9
Too many posts.. I need a life!!
Thread Starter
Join Date: Oct 2004
Location: Ambergate,Derbyshire
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
#10
Too many posts.. I need a life!!
Thread Starter
Join Date: Oct 2004
Location: Ambergate,Derbyshire
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
this is what im after.
The letter and number legal size and spacing. Ive found one place but theyre Ł73 a pair!!!!!!!
Dunc
The letter and number legal size and spacing. Ive found one place but theyre Ł73 a pair!!!!!!!
Dunc
#11
PassionFord Regular
#12
http://www.dmb.uk.com/cart.php
these guys made my up, in the checkout cart put a message like "shortest legal plates please"
these guys made my up, in the checkout cart put a message like "shortest legal plates please"
#14
PassionFord Post Whore!!
iTrader: (1)
Join Date: Oct 2005
Location: Liverpool
Posts: 5,016
Likes: 0
Received 0 Likes
on
0 Posts
Just been on DMB's site, Ł30 a pair!? I mean, am not minge and dont mind paying, but Ł15 each for numberplates?!
If i could get the right sizes id get a set off the link Jimbo posted.
If i could get the right sizes id get a set off the link Jimbo posted.
#15
Advanced PassionFord User
Jimbo, they look good! what size widthways are those? 112mm is the legal height i know, but whats the width?
520mm wide are standard plates, i need to know what the shortest i can go is with the standard height letters and correct spacing with a 5 digit number
cheers
Dunc
My plates are 16 x 4.5 on the site I used, and that is quite tight for a 6 digit plate.. As far as I know there is no legal requirement for length, alsong as there is an 11mm gap between the edge of the letter and the edge of the plate.
The next size down from mine is 14 x 7 for some reason but that makes the height to much. By the time you've put a border round a 5 digit plate I would say the 16 x 4.5 is going to be just right without making it look to cramped.
#17
PassionFord Post Whore!!
I can do you a pair of cutdowns for Ł25 delivered. I'm not back in the UK until the weekend so wont be until next week. Size wise I can do anything you like!
Chris
Chris
#20
Too many posts.. I need a life!!
Thread Starter
Join Date: Oct 2004
Location: Ambergate,Derbyshire
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
Hi
cheers for your replys, im not too sure on the length, just as long as the height is 112mm (legal height) and the digits are legal size and spacing. Just want the plate to be as short as poss with a boarder
just like the picture i posted above!
Dunc
cheers for your replys, im not too sure on the length, just as long as the height is 112mm (legal height) and the digits are legal size and spacing. Just want the plate to be as short as poss with a boarder
just like the picture i posted above!
Dunc
#21
PassionFord Post Whore!!
Here you go, standard lettering but pushed up to the edge. The white depicts a standard width plate!
To everyone else that has pm'd me i will reply tonight!
Pm me if you'd like a set.
Cheers
Chris
To everyone else that has pm'd me i will reply tonight!
Pm me if you'd like a set.
Cheers
Chris
Last edited by cfoster; 26-01-2010 at 05:29 PM.
#24
Too many posts.. I need a life!!
Thread Starter
Join Date: Oct 2004
Location: Ambergate,Derbyshire
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
they look spot on mate! Would these pass an MOT too? being as the lettering and spacing is legal?
Dunc
#25
PassionFord Post Whore!!
Wouldnt like to say if they will mate, if it has the necessary marks then I cant see why not, although for the sake of a few quid more it could be worth having a plain boggo pair made, or keep your original ones in the boot just in case. All depends how anal the tester is I suppose.
Gus - templates are done mate but am in Switzerland until the weekend. I'm off monday and tuesday so feel free to pop over to collect
Gus - templates are done mate but am in Switzerland until the weekend. I'm off monday and tuesday so feel free to pop over to collect
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford Focus RS Parts for Sale.
5
09-03-2016 01:03 PM
Focosmitch
Ford RS Cosworth Parts for Sale
5
03-11-2015 04:08 PM
The Enigma
Ford Sierra/Sapphire/RS500 Cosworth
2
12-09-2015 10:12 PM
Adam Graham
Restorations, Rebuilds & Projects.
7
06-09-2015 06:04 AM