Were to get my Cossy head ported .............
#1
Advanced PassionFord User
Thread Starter
Join Date: Jun 2003
Location: Lancashire
Posts: 1,627
Likes: 0
Received 0 Likes
on
0 Posts
Were to get my Cossy head ported .............
Hi I need my head porting rapid,(no pun intended) does anyone know who still does this ?
No daft prices neither.
Dave.
No daft prices neither.
Dave.
Trending Topics
#13
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by TIFF-C20WTH
Originally Posted by DaveEscos
... this is Tiff.. mns pr strateigist, pulling out and signing off!
Its NMS not MNS
#17
Norris Motorsport
Thanks everyone for the kind remarks recommending myself. It is much appreciated!!
However at the momment I have 3 YB heads, 1 pinto and 2 cvh heads to port before I can take on anyone elses, so you're looking at around a 4 months wait before I can even start! If you're prepared to wait that long give me a shout!
However at the momment I have 3 YB heads, 1 pinto and 2 cvh heads to port before I can take on anyone elses, so you're looking at around a 4 months wait before I can even start! If you're prepared to wait that long give me a shout!
#19
20K+ Super Poster.
iTrader: (1)
Join Date: May 2003
Location: Essex... and Birmingham!
Posts: 21,512
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Smit
Nick lives in spain though don't he Lee? I Know Harvey uses him...heard he is very good...dunno what kinda turn around time he does though
Personally I'd use Karl though... oh thats right I did
#21
Norris Motorsport
Dave,
It's not as simple as that. You need to tell me exactly what work you require and to what spec and of course the condition of the head is very important as I may need to weld the head if corrosion is present. In addition you will need new quides fitted and have the option of new valves and various choices of valve spring.
If you're serious enough though, send me an email to my nms addy and we can discuss it further. Thanks,
It's not as simple as that. You need to tell me exactly what work you require and to what spec and of course the condition of the head is very important as I may need to weld the head if corrosion is present. In addition you will need new quides fitted and have the option of new valves and various choices of valve spring.
If you're serious enough though, send me an email to my nms addy and we can discuss it further. Thanks,
#23
Chasing Radders
Originally Posted by Bosch Man
Yep Karl is well known thru out the NMS camp for the best head this side of a female.
#30
10K+ Poster!!
Join Date: May 2003
Location: not far away
Posts: 10,011
Likes: 0
Received 0 Likes
on
0 Posts
#31
Originally Posted by Karl
Thanks everyone for the kind remarks recommending myself. It is much appreciated!!
However at the momment I have 3 YB heads, 1 pinto and 2 cvh heads to port before I can take on anyone elses, so you're looking at around a 4 months wait before I can even start! If you're prepared to wait that long give me a shout!
However at the momment I have 3 YB heads, 1 pinto and 2 cvh heads to port before I can take on anyone elses, so you're looking at around a 4 months wait before I can even start! If you're prepared to wait that long give me a shout!
#32
Chasing Radders
Originally Posted by BROM@ZOO
hi mate hows my head lookin need to get back out there on track