B1G_RST

iTrader: (1)

after fitting my bremsport 4 pots on th ecos, im struggling to get a good firm pedal, ive bled it twice now,

when bleeding i bled the furthest away caliper, and the furtherest nipple, then the closer nipple and same on next caliper,,

then when i bled it the 2nd time, i did the closer nipple first on the further caliper and so on,

then when i fit the brake res cap and start it the pedal goes down slighty but stil nice and firm, then when i drive her its shite!! must have some air trapped somewhere,

any help ??

mechanic28

iTrader: (5)

you fitted new pads and discs?

Chris Honeywell

You got to go back and keep bleeding m8
few years back i had hell of a job getting all the air out my my 6 pot APs i must of put 2 litres of fluid through.

With my clutch on my Ferrari i had to use a pressure bleeder to get all the air out as no way in hell was it comming out the good old fashioned way

cossiejay

is the servo big enough to work them

boost monster

How are you bleeding them? I always use a pressure thing on my master cylinder and it works for me. Love the car btw

Fudgey

iTrader: (4)

you havnt been to ATS have you??

B1G_RST

iTrader: (1)

whats ats when its at home?

Fudgey

iTrader: (4)

they do brakes/tyres/exhausts etc...

bit like kwikfit, but royally fucking useless!