what wheels for a black rs500? pictures?
#1
what wheels for a black rs500? pictures?
what wheels look good on a rs500? i would like some cnx's but they never come along second hand. i've been quoted £1600 plus vat for them new plus tyres
my standard wheels have the dunlop d40 tyres on them so i don't want to use them.
what other wheels, what colour look good on a black rs500? pictures if you have them
my standard wheels have the dunlop d40 tyres on them so i don't want to use them.
what other wheels, what colour look good on a black rs500? pictures if you have them
Last edited by B13 JUS; 23-11-2009 at 10:09 AM.
#2
Too many posts.. I need a life!!
iTrader: (1)
I have what in my opinion look slightly better then cxn's due to there offset and width.
Genuine BMW BBS alloys.
Have been a nightmare to get them to fit under big brakes front and rear and cost a small fortune due to having them refurbed, new tyres, 5x120 hubs etc,
a complete nightmare but will be worth in the end.
Should be finished this week, here is a pic taken during mock up.
Genuine BMW BBS alloys.
Have been a nightmare to get them to fit under big brakes front and rear and cost a small fortune due to having them refurbed, new tyres, 5x120 hubs etc,
a complete nightmare but will be worth in the end.
Should be finished this week, here is a pic taken during mock up.
#4
have you got any pics now those BBS rims are on? Nice to see something slightly different and they look lovely.
If you can find some second hand CXN's, expect to pay as new prices for them anyhow. I've never ever seen a set go cheap, especially the old style.
If you can find some second hand CXN's, expect to pay as new prices for them anyhow. I've never ever seen a set go cheap, especially the old style.
#5
I've found that life I needed.. It's HERE!!
Join Date: Mar 2007
Location: The Netherlands
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Original BBS splits in Ford fitment are even more expensive then CXN's normally. IF you do see a set on ebay they go for 2K+ mostly.
#6
Too many posts.. I need a life!!
iTrader: (1)
Yes mate it cost about the same buying a new set of cxn's to be honest, but I couldnt get the cxn's to clear 330 4 pot ap's and 300mm rears, also the dish just wasnt wide enough.
The BBS wheels just have a stealthier look imo.
Will have them finished this week hopefully then get some proper pics.
Heres another 1 during mock up
The BBS wheels just have a stealthier look imo.
Will have them finished this week hopefully then get some proper pics.
Heres another 1 during mock up
Last edited by 3dr; 23-11-2009 at 04:14 PM.
Trending Topics
#10
15K+ Super Poster!!
iTrader: (6)
Yes mate it cost about the same buying a new set of cxn's to be honest, but I couldnt get the cxn's to clear 330 4 pot ap's and 300mm rears, also the dish just wasnt wide enough.
The BBS wheels just have a stealthier look imo.
Will have them finished this week hopefully then get some proper pics.
Heres another 1 during mock up
The BBS wheels just have a stealthier look imo.
Will have them finished this week hopefully then get some proper pics.
Heres another 1 during mock up
I have AP 330 fronts and 300mm rear on my rs500 behind CXN"s
#11
Too many posts.. I need a life!!
iTrader: (1)
Really, when I called compomotive they said they where unsure and could not guarantee fitment.
I prefer the BBS anyway to be honest.
More to the point B13 JUS get some pics up of your 500, maybe somebody can do a photoshop for you.
2 more.
I prefer the BBS anyway to be honest.
More to the point B13 JUS get some pics up of your 500, maybe somebody can do a photoshop for you.
2 more.
Last edited by 3dr; 23-11-2009 at 04:13 PM.
#13
15K+ Super Poster!!
iTrader: (6)
To be honest compomotive are totally usless when it comes to advice on fitments etc , plus the woman who answers the phone has a serious attitude problem
You better of talking to Martin hadland to be honest , he will tell you whats what with compomotive wheels
CXN"s can be a bit of a nightmare tho to get them right
#15
PassionFord Post Troll
iTrader: (8)
I tried out the BMW BBS wheels on my 4x4 3dr, even had the hubs modified, but broke it instead the hubs are still sat in my shed
Tried two types, the more traditional ones which I prefer
and the later ones which are a bit more like the LMs
Tried two types, the more traditional ones which I prefer
and the later ones which are a bit more like the LMs
Last edited by PAUL S; 23-11-2009 at 04:26 PM.
#17
I've found that life I needed.. It's HERE!!
Join Date: Mar 2007
Location: The Netherlands
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Yes mate it cost about the same buying a new set of cxn's to be honest, but I couldnt get the cxn's to clear 330 4 pot ap's and 300mm rears, also the dish just wasnt wide enough.
The BBS wheels just have a stealthier look imo.
Will have them finished this week hopefully then get some proper pics.
Heres another 1 during mock up
The BBS wheels just have a stealthier look imo.
Will have them finished this week hopefully then get some proper pics.
Heres another 1 during mock up
Where did you find these?
#24
I've found that life I needed.. It's HERE!!
Join Date: Feb 2005
Location: Bangor N.I.
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
i had a wooden mock up wheel made to make sure these would fit. The centres are custom made to your requirements too as the brakes clearance was important. the rear suspension moving in an arc helps too, the pic shows the coil overs set quite high.
#26
I've found that life I needed.. It's HERE!!
Join Date: Feb 2005
Location: Bangor N.I.
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
#27
WHEEL EXPERT :~)
Join Date: Nov 2009
Location: Wolverhampton. U.K.
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Great wheel advise from the wheel experts
IF YOU WANT TO BUY COMPOMOTIVE 3PC 17" CXN WHEELS FOR YOUR CAR WHICH LOOK FANTASTIC WE WOULD BE HAPPY TO HELP YOU WITH ANY ADVISE YOU REQUIRE REGARDING WHEEL FITMENTS TO YOUR CAR.... WE DO HAVE LOTS OF EXPERIENCE WITH THESE FITMENT & IN THE PAST WE HAVE FITTED 7.5, 8 & 8.5 & EVEN 9x17s TO SIERRA COSWORTHS SOME of OUR HAPPY CUSTOMERS CARS CAN BE VIEWED ON OUR WEBSITE WWW.COMP.CO.UK. IF YOU HAVE LARGER BRAKES FITTED WE CAN EMAIL YOU OUR SPEC SHEET TO CHECK CLEARANCES OR ALTERNATIVELY YOU CAN CONTACT MARTIN HADLAND @ REYLAND WHO HAS ACTUALLY PHYSICALLY CHECKED OUT OUR WHEELS ON LOTS OF LARGE BRAKE APPLICATIONS.
#28
Too many posts.. I need a life!!
Join Date: Jun 2003
Location: Australia
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
nice work 3dr.. BBS RC 090.. et 20.. 17x8? Id take BBS over Comps any day Would look even better with 17x9 et22
how did you fit the 5x120 wheel onto the front? custom hubs?
how did you fit the 5x120 wheel onto the front? custom hubs?
Thread
Thread Starter
Forum
Replies
Last Post
steerfromdarear
Restorations, Rebuilds & Projects.
28
29-01-2016 06:14 PM
TrevCos
Modellers Corner.
0
24-08-2015 09:31 PM
borboyous
Cars for Sale
6
22-08-2015 11:17 AM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM