Got an 04 transit and it has a digital clock in the rev counter bit, i disconnected the battery for a while, just connected it back up and the clock is all garbled? Also the spanner light which lights up to indicate service is very faintly lit its bright on the ign on bit but once running faint Anything i can do????

 

does the clock say "diag" in it. if it do's its in transport mode. don't know how you have done that though if it is.

try resetting the service light. press and hold down the throttle followed by the brake pedal,keeping them both pressed down turn the ignition on,the spanner should start to flash,then turn the ignition off.

 

It doesnt say anything its just garbled?

 

did you find a fix?

 

As said above put your feet on the brake and throttle pedal turn ingnition on and wait for the light to flash.Then turn the ignition off.

 

thats spanner(service) reset