whats the best one out? need one for my emerald thinking of tech edge but looking whats out there.

 

ive got an inovate one seems ok lol

 

zeitronix are a good bit of kit.

 

i second that

 

jay on emerald did you use EGT? what software is compatible as i want to run egt on my emerald.

 

Stack.

 

i used a audi g235 sensor off a 2002 rs4 and it worked spot on then wired the zeitronix up to the emerald for self tune + closed loop , unlike most widebands the zeix is cheap to use with its own egt sensor and map sensor so enables you to do a full data log

 

http://www.zeitronix.com/index.html

llok at the site brilliant bit of kit

 

thats what i need what other lambdas work? what audis have these type of senders

 

lambas ? thought u ment egt well late audi 20v turbos habe them to make sure its the black box not the red one

 

sorry ment egt!

 

None of the LSU4 based kits are super accurate, but if you're happy with say a 5% or so error margin then any of them should do the job.

 

I use the Motec PLM.... Expensive but good !

As with anything, these are only as good as the sensor, its location and its amount of use.

 

Hi Jay, I just wondered if you know what thread patten the G235 takes , as I have an emerald too and i wish to tap it into my exhaust.

regards

 

m12 1.25mm pitch iirc to add u need to taper it at the bottom to hold the egt sensor in place , if you have a sensor that will make sense lol

 

Thanks for that!