righthooker

sight problem , i have a shell and am removing the glass.
However the car has no power ,relays or any electrics.
I remember taking the front door windows out of another shell, and we let the leccy windows down first, but this time i cant wind em down!!


Any ideas other than smashing the fookers lol

dave cos4x4

iTrader: (5)

do you just want the glass Clive and not the doors, if so cut the door skin open lol.

dave cos4x4

iTrader: (5)

forget that Clive,just realised.

SteveH

Why not hot wire the motor to wind it down?
If not, you could try pushing them down, if there is no motor... but I doubt that will work?

righthooker

tried pushing,,, nope i see my wrists getting slashed lol,,.

Dave want to replace em with perspex,,,supose i could cut out the insides and save weight lol

SteveH

Is the mechanism still in the door?

You could unbolt it and try dropping it out?

righthooker

i could,but didnt have a drill handy for the rivets,, no rush today,, will be next weekend now

neil andeRSon

iTrader: (3)

just get a battery and 2 length's of wire. touch the wire onto the window motor terminal's and it'll either go up or down. if it want's to go up switch the wire's around and they should go down..

righthooker

hhmmm, so that would work by disconecting the plug in the door?? and putting the wires in there??

The Youth.

iTrader: (1)

clive next time you go down the unit gis a shout and I will do it for ya..
btw do you know any 3 phase leccys? the ramps bust, one phase is down guess there is water in it like last time.

steve

neil andeRSon

iTrader: (3)

i would think so??

only times i've done it i wired it directly to the motor.

SS1

iTrader: (3)

the windows bottom track only has plastic poppers into the scissors mechanism..carnt you reach up with your hand and pop the arms away from the track ..also keep hold of the window so you dont chop your hand off inside the door when the window falls down

forgot to add theres a philips screw head on the bottom right of the door to loosen the guide rail as well

righthooker

will do. I will ask my electrition if he can.

righthooker

tried but my ams are a bit fat lol

dangerousbrian

use a flathead screwdriverand put it between the mechanism arm and the track on the bottom of the glass and twist the screwdriver...should pop the glass away

SS1

iTrader: (3)

use a short piece of wood then..mine popped out last when i tried to lower the window as the glass was frozen into the top door guides via -2 degrees

its not fun striping doors down at 11pm in the dark when you have to do it ..no option

fuckin cars eh

robrs2

All i can picture is one battery, 2 wires, a big flash and BANG

Clive its easy m8.

rs combi

yes it will work had to do it to mine when the switch/ wiring broke on mine