xr4x4rs

iTrader: (5)

what sort of power could you get from a .5 oversize 200 block safely

would 500bhp be able to be achieved?

the crank may possibly be on .5 aswell

obviously it would have the correct pistons and everything else to match, im just thinking of strength

JTECH James

iTrader: (13)

block will be fine for 500bhp at .5,

crank may be an issue, at .5 though

xr4x4rs

iTrader: (5)

the cranks on .25 at the mo and it does have a little scoring, im hoping it will polish out if need be

TiB

iTrader: (1)

I'm running 600bhp + approx 60bhp gas on a 1mm over sized block, as for the crank... it's how its ground that is important, the radius's need to be good as thats where the strength is, My crank is on .25/.5 with no issues so far.

xr4x4rs

iTrader: (5)

thats nice to know then

thanks for that at least i dont have to look for another crank