stevev6

Hi guys, galls,This is my project i will be fitting in the next couple of weeks. What i want to know is what ppl recommend - pressure and anythin that may need changing from the list below. I have most parts now needed and can start the conversion anytime soon. Have been told it will run better on greys but have already got greens.

My car is a small turbo ecos. Currently fitted is a full blue flame exhaust and twin piston dump valve with a modified saph pace rs500 style intercooler.

I will be fitting - t34 turbo with .63 housing, walbro fuel pump (hotwired) 'greens' complete brand new engine loom, group a headgasket and all new inlet exhaust gaskets etc, cambelt, alternator belt, (I think) - level 8 ecu with bajoo chip group a air filter and group a coil, bailey breather system and swirl pot.

What do you guys rekon?

Steve

stevev6

Nobody want to help?????

cossie daz

all sounds good to me,have u up rated radiator?

Shorty

iTrader: (1)

Should be a nice 340-350bhp mate on the greens.

Shorty

iTrader: (1)

Didnt think he would need to uprate the radiator, standard rads work fine on a stage 3 car IMO.

stevev6

Got a standard rad. What pressure do u reckon? been told about 23-25psi?


Steve

Shorty

iTrader: (1)

Boost pressure?

Yeah about 26psi flash up, holding about 23/24psi i reckon.

Mr C

iTrader: (2)

as mantioned above by shorty, a good condition std rad should be fine and a change to an alloy item may drop at least 3 degrees more in water temp so more efficient. you got a breather sorted too as I would rcommend one for anything over a Stg1 chip