engine advantages???
25-04-2008, 09:57 PM
#3
10K+ Poster!!
I have no experience with EA but my advice is DO NOT settle for second best for the sake of a few hundred miles!
I drove to London from Scotland to have my management system fitted.
I drove to London from Scotland to have my management system fitted.
Trending Topics
25-04-2008, 10:19 PM
#8
Too many posts.. I need a life!!
Join Date: Aug 2005
Location: essex
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
Based on no personal experience, just entirely on posted threads
( so 100% accuracy is not guaranteed
)
But seen quite a few posts by unimpressed customers, many who had work carried out by other employees and not Paul Hills himself.
But every tuner has at least one critic, so try and go with the best rep' even if it means a few extra miles
( so 100% accuracy is not guaranteed
)But seen quite a few posts by unimpressed customers, many who had work carried out by other employees and not Paul Hills himself.
But every tuner has at least one critic, so try and go with the best rep' even if it means a few extra miles
25-04-2008, 10:38 PM
#11
Hence why im going to be making the trip up to Blackpool from Derby to see Stu
....see/hear bugger all said against him and MSD but many thumbs up's seen on here, so cant argue with that in an age when people are quite happy to moan when something aint right but seem forgetfull when alls perfect
25-04-2008, 10:45 PM
#14
10K+ Poster!!
iTrader: (9)
Join Date: May 2004
Location: birmingham west mids
Posts: 11,919
Likes: 0
Received 11 Likes
on
9 Posts
External Wastegates mounted on EGR pipes anyone? 
.. Oh and my saff ( previously mapped by EA) running 9% C.O on greens? 
... In a word, NO!!
MSD By a mile, worth the distance for peace of mind, simple as.
.. Oh and my saff ( previously mapped by EA) running 9% C.O on greens? ... In a word, NO!!MSD By a mile, worth the distance for peace of mind, simple as.
25-04-2008, 10:47 PM
#16
Too many posts.. I need a life!!
Join Date: Aug 2005
Location: essex
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
25-04-2008, 10:51 PM
#17
10K+ Poster!!
iTrader: (9)
Join Date: May 2004
Location: birmingham west mids
Posts: 11,919
Likes: 0
Received 11 Likes
on
9 Posts
You want to be careful, they will probably put the tyre valve in wrong, and end up running the tyre at 300Psi, just like someones brand new engine .. Then not pay for the damage and lie about the fitting session, and say that you told them to mount the valve like that, so there
.. Then not pay for the damage and lie about the fitting session, and say that you told them to mount the valve like that, so there
fancy seeing you here
25-04-2008, 11:10 PM
#23
I've found that life I needed.. It's HERE!!
Join Date: Sep 2003
Location: Gloucester
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
25-04-2008, 11:16 PM
#25
Advanced PassionFord User
25-04-2008, 11:19 PM
#27
I've found that life I needed.. It's HERE!!
Join Date: Sep 2003
Location: Gloucester
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
26-04-2008, 04:37 AM
#30
20K+ Super Poster.
I used MSD TWICE and the chips, they supplied TWICE, did not work TWICE.
I went to get the problem sorted at EA, with 100% success, now it runs perfect.
On a lighter note MSD did give me a full refund without hesitation, but a full mapping sessions was mentioned, even though it didn't need it at this level(stage three).
I can only say when I went, that PAUL, was confident the MSD chip was NOT to blame, until after exhausting all other avenues this was changed, the MASSIVE hole in the power band dissapeared before my eyes, despite all being set up according to the sheet supplied by MSD, I now run a EA chip, but going Emerlad ECU anyway as w/m is a load of crap compared with newer stuff, and on a cost/function basis it certainly is.
tabetha
I went to get the problem sorted at EA, with 100% success, now it runs perfect.
On a lighter note MSD did give me a full refund without hesitation, but a full mapping sessions was mentioned, even though it didn't need it at this level(stage three).
I can only say when I went, that PAUL, was confident the MSD chip was NOT to blame, until after exhausting all other avenues this was changed, the MASSIVE hole in the power band dissapeared before my eyes, despite all being set up according to the sheet supplied by MSD, I now run a EA chip, but going Emerlad ECU anyway as w/m is a load of crap compared with newer stuff, and on a cost/function basis it certainly is.
tabetha
26-04-2008, 07:29 AM
#32
Wahay!! I've lost my Virginity!!
Join Date: Dec 2007
Location: essex
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
all about this madness
hi,i've had a complete engine rebuild by them.i've never ever found any problems with them.they are down to earth people iv been getting my car mapped there for the last 18 months with very good results running a paul hills chip and the service iv experienced from paul and his staff have been second to none
Thread
Thread Starter
Forum
Replies
Last Post
Marc sierra
Ford Sierra/Sapphire/RS500 Cosworth
12
30-08-2015 10:38 AM
Hellraiser
Ford Sierra/Sapphire/RS500 Cosworth
2
30-08-2015 10:29 AM