DYNO Figures the truth the whole truth......................
17-07-2007, 06:17 PM
#44
PassionFord Post Whore!!
Originally Posted by Bosch_Dealer
...maybe worth speaking to jullian godfrey as he has dynoed 750 + bhp without problems..no diss of course....but maybe good to ask where they get the blocks prepped.
Mark
17-07-2007, 06:34 PM
#46
PassionFord Post Whore!!
Originally Posted by markk
Mark , every credit to you for being one of the only engine builders/tuners that loves huge torque figures that almost equal your hp figures 
Thanks and will be aiming for more on the next tweaked spec, I am very happy with the TQ spead and this spec was all my own with no help or advice from anyone 
.Mark
17-07-2007, 06:40 PM
#47
Originally Posted by Mark Shead
Originally Posted by markk
Mark , every credit to you for being one of the only engine builders/tuners that loves huge torque figures that almost equal your hp figures
Thanks and will be aiming for more on the next tweaked spec, I am very happy with the TQ spead and this spec was all my own with no help or advice from anyone .Mark
cheers
mark
17-07-2007, 06:55 PM
#48
PassionFord Post Whore!!
Originally Posted by markk
Originally Posted by Mark Shead
Originally Posted by markk
Mark , every credit to you for being one of the only engine builders/tuners that loves huge torque figures that almost equal your hp figures
Thanks and will be aiming for more on the next tweaked spec, I am very happy with the TQ spead and this spec was all my own with no help or advice from anyone .Mark
cheers
mark
Mark
17-07-2007, 08:00 PM
#52
Advanced PassionFord User
iTrader: (1)
Join Date: Dec 2004
Location: Bristol
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rapidcossie
Mark...you must looking forward to trying the full 1000bhp?
Scary is not the word
Scary is not the word
17-07-2007, 08:07 PM
#54
PassionFord Post Troll
iTrader: (2)
Join Date: May 2003
Location: In my garage, coventry
Posts: 3,065
Likes: 0
Received 2 Likes
on
2 Posts
Sorry to hear this Rod 
Onwards and upwards though
Fantastic power and torque
Hope the block isnt going the way of the millington ones
Good luck and keep us posted hope your still comming up to totb
Onwards and upwards though
Fantastic power and torque
Hope the block isnt going the way of the millington ones
Good luck and keep us posted hope your still comming up to totb
17-07-2007, 10:43 PM
#62
PassionFord Post Troll
iTrader: (2)
Join Date: May 2003
Location: In my garage, coventry
Posts: 3,065
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by MAD YUM
Originally Posted by Alg1k
Hope the block isnt going the way of the millington ones
:
:
No chance of that
And those liners were specked for a fousand break
Torque monster
17-07-2007, 11:07 PM
#63
PassionFord Post Whore!!
Shame about the issue's, but 1 step backwards and then 10 steps forward.
Bloody good graph tho, well done lad's.
What head gasket is that? Cometic?
Bloody good graph tho, well done lad's.
What head gasket is that? Cometic?
18-07-2007, 07:03 AM
#64
just clocked this thread after looking on daves.
so so gutted for you rod/mark.thats making some mental figures and,ok youve had a set back but its far better to have it at this stage than later on.
things can only get better from here look forward to seeing her flying ans mashing all previous records 
good luck lads.
so so gutted for you rod/mark.thats making some mental figures and,ok youve had a set back but its far better to have it at this stage than later on.
things can only get better from here
look forward to seeing her flying ans mashing all previous records good luck lads.
18-07-2007, 07:39 AM
#66
PassionFord Post Whore!!
Originally Posted by Fiecos Dan
Shame about the issue's, but 1 step backwards and then 10 steps forward.
Bloody good graph tho, well done lad's.
What head gasket is that? Cometic?
Bloody good graph tho, well done lad's.
What head gasket is that? Cometic?
Mark
was looking forward to seeing this car at totb hope you get it sorted
18-07-2007, 07:53 AM
#69
I've found that life I needed.. It's HERE!!
Join Date: May 2003
Location: south wales
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
from 4000 rpm to 5000 rpm it gains over 300 hp !!thats mental !!
the failure is propper gutting
but if the soultion is already afoot and more power on the horizon its all good.great torque too.
MAD ! ! !! !!! !!!!
18-07-2007, 01:45 PM
#72
was good to see you all again yesterday Rod, just a shame i arrived too late and the deed was done
still, you all seemed very happy with the results so far and fair fucking play!
its a god damn monster!
good luck with the new spec, just a shame it wasnt the gasket like you thought, but onwards and upwards as they say
still, you all seemed very happy with the results so far and fair fucking play!
its a god damn monster!
good luck with the new spec, just a shame it wasnt the gasket like you thought, but onwards and upwards as they say
18-07-2007, 07:42 PM
#73
Originally Posted by MadRod
hI
The graph the point of liner moving can be seen at 6.5k though 700bhp at 7k with a broken head gasket cant be bad. .
The graph the point of liner moving can be seen at 6.5k though 700bhp at 7k with a broken head gasket cant be bad.
.hi rod
that engine holds the torque well across the rev range thats would have been a seriouly fast engne
hopefully you boys can sort it out good luck
marco
18-07-2007, 07:56 PM
#75
PassionFord Post Troll
Hopefully it will all come together and make some serious power
bit off topic but Simon@FastFord.. whens that edition of FF coming out in your avatar..
Cheers
bit off topic but Simon@FastFord.. whens that edition of FF coming out in your avatar..
Cheers
Thread
Thread Starter
Forum
Replies
Last Post