siemens injectors ? why ?
#1
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
As above seen a few people with these injectors lately , and iknow msd do them , are these superior to the green and grey type injectors that im used to seeing ?
Im hopefully trying to get my car down to msd when theres a space with some mates etc , and wondered if this could be a way to go ? got light blues here which im selling and got the usual stage 3 set up a the moment greens/3 bar , just a bit of info or am i better off just sticking with what ie got
What siemens injectors are equivalant to my stage 3 set up
thankoo
Im hopefully trying to get my car down to msd when theres a space with some mates etc , and wondered if this could be a way to go ? got light blues here which im selling and got the usual stage 3 set up a the moment greens/3 bar , just a bit of info or am i better off just sticking with what ie got
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
What siemens injectors are equivalant to my stage 3 set up
thankoo
#3
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by rabmc
Im hopefully trying to get my car down to MSD when theres a space with some mates etc , and wondered if this could be a way to go ?
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
What ecua nd turbo do you have an What power do YOU want?
Once i know this i can plan it for you a bit better.
#4
PassionFord Post Whore!!
Join Date: May 2003
Location: Sheffield
Posts: 9,156
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
And unless you're going to break those flow rates, theres not really much point getting them imo, if your greens are working fine..
However, one advantage would be that they wont be any where near 95% duty cycle at stage 3 power, as i think even the smaller injectors are equivalent to greys...
However, one advantage would be that they wont be any where near 95% duty cycle at stage 3 power, as i think even the smaller injectors are equivalent to greys...
#5
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well stu , its a 3 door cosworth chip is totally unknown to me as fitted by previous owner and basically got car way last year stage 3 , greens/3bar but only runnin 14psi ? and i believe its a L6 ecu
Now rough spec now is , as above some of it might not make a difference tbh but here goes ,New t35/55, full mongoose system , standard comp, had a bit of head work but standard cams/pulleys. pace 500 cooler/alloy rad, swirl pot , spec r breather , 044 pump and this is roughly about it if i can remember right . as soon as this clutch has been put in i can get something booked up , as its now slippng
Any power suits me , not chasing big power , but a safe useable stage 3 would be great as it doesn`t knowits arse from ts elbow just now , poor car
and driving around like miss daisy at moment and have been since i got car tbh
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
Now rough spec now is , as above some of it might not make a difference tbh but here goes ,New t35/55, full mongoose system , standard comp, had a bit of head work but standard cams/pulleys. pace 500 cooler/alloy rad, swirl pot , spec r breather , 044 pump and this is roughly about it if i can remember right . as soon as this clutch has been put in i can get something booked up , as its now slippng
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Any power suits me , not chasing big power , but a safe useable stage 3 would be great as it doesn`t knowits arse from ts elbow just now , poor car
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#6
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by rabmc
Well Stu , its a 3 door cosworth chip is totally unknown to me as fitted by previous owner and basically got car way last year stage 3 , greens/3bar but only runnin 14psi ? and i believe its a L6 ecu
Now rough spec now is , as above some of it might not make a difference tbh but here goes ,New t35/55, full mongoose system , standard comp, had a bit of head work but standard cams/pulleys. pace 500 cooler/alloy rad, swirl pot , spec r breather , 044 pump and this is roughly about it if i can remember right . as soon as this clutch has been put in i can get something booked up , as its now slippng
Any power suits me , not chasing big power , but a safe useable sage 3 would be great as it doesn`t knowits arse from ts elbow just now , poor car
and driving around like miss daisy at moment and have been since i got car tbh
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
Now rough spec now is , as above some of it might not make a difference tbh but here goes ,New t35/55, full mongoose system , standard comp, had a bit of head work but standard cams/pulleys. pace 500 cooler/alloy rad, swirl pot , spec r breather , 044 pump and this is roughly about it if i can remember right . as soon as this clutch has been put in i can get something booked up , as its now slippng
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Any power suits me , not chasing big power , but a safe useable sage 3 would be great as it doesn`t knowits arse from ts elbow just now , poor car
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
Trending Topics
#10
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hope so matey , and can get a wee day or weekend out at blackpool into the bargain
just feels like theres always a dark force stopping this car being fast
if its not the hassle from getting car looking better , to fixing engine , to fixing shitty fuel pump and this and that , then half moons pissing oil to mr clutch throwing in the towel
Still chasing the dream lol
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Still chasing the dream lol
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#12
Too many posts.. I need a life!!
Join Date: May 2003
Location: NORWICH
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ive just fitted stage 3 bits to a 4x4 sierra today using one of motorsport developments closed loop chips......
ace mate!!! idles at lambda 1 which after what we saw at our rolling road day is a rare thing
who wants to run around burning more fuel that whats needed
this was with greens but im sure stu can cast his magic for greys too
ace mate!!! idles at lambda 1 which after what we saw at our rolling road day is a rare thing
who wants to run around burning more fuel that whats needed
this was with greens but im sure stu can cast his magic for greys too
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#16
PassionFord Post Whore!!
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
My running in chip arrived the other day from MSD for my newly built lump (mega fast delivery/turn around)....after a few final checks prior to key turn, it fired up straight away and idles mint, revving cleanly thru the range....and ive not even had chance to set up fuel pressure and co yet....top job
Will be seeing you guys for my final live map...and my first day trip to black pool as well
Stu.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Will be seeing you guys for my final live map...and my first day trip to black pool as well
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
Stu.
#18
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by carlo
I wish i knew about MSD closed loop system in my cossie days but its never too late i might get another one ![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Well shout you a holla dog when were going down , see if you can make it ! you going to K.hill tomorrow
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#20
PassionFord Post Whore!!
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Top marques thingy , me and nuttin and roys gonna maybe take a run up if weathers good
Phone me if you change your mind mate and we can sort something out , im off out
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Phone me if you change your mind mate and we can sort something out , im off out
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
timsrs
Ford Sierra/Sapphire/RS500 Cosworth
22
24-09-2015 08:14 PM