Thinking about replacing the loom as i get intermittent faults indicated on the pectel monitor and it also misfires sometimes.

So how hard is it to replace, does it hook up to alot more places than all the sensors, do i have to remove the dash or is it pretty straight forward?

/Andreas

 

Easy mate! Remove the dash etc etc & you'll be ok

 

Sounds too hard for me so Dingy will be called in to do it

 

just take out the pectel monitor and sell it to me or swap my loom for it

 

When hell freeze.....not even then

Actually if i need a new loom i build it myself.

Spent the evening measuring up the resitance and it seems good. At one point a noticed a glitch with one of the multiplugs but after i pulled it apart and put it back together all was fine. If get more trouble with i will cut it out.