bodging thread... exhuast blow
#1
20K+ Super Poster.
Thread Starter
bodging thread... exhuast blow
ok heres the background, i have a new pukka S/S exhaust waiting to fit, but it only fits the turbo XR4s not the NASP ones...
i have a ickle tiny blow in my shitty standard 20year old exhaust thats on the car...
its only gotta stay on there for a few weeks so im either gonna leave it blowing, or bodge it up somehow... pointless spending money on it if im gonna swap it very soon
so wot y recon... i cant use one of those clamp things coz its where the pipe goes into one of the boxes... cant be arsed to weld it (well, get a mate to weld it... lol) so i assume pumping the mofo full of paste shit's the best option? but whats to stop it blowing all the paste out 5mins down the road? any ideas for getting it to hold? also what about using gaffertape?
its only gotta last a few weeks (n dont matter if i gotta do it a few times anyway) so not after anything sturdy
ideas? nomatter how stupid they may seem?
i have a ickle tiny blow in my shitty standard 20year old exhaust thats on the car...
its only gotta stay on there for a few weeks so im either gonna leave it blowing, or bodge it up somehow... pointless spending money on it if im gonna swap it very soon
so wot y recon... i cant use one of those clamp things coz its where the pipe goes into one of the boxes... cant be arsed to weld it (well, get a mate to weld it... lol) so i assume pumping the mofo full of paste shit's the best option? but whats to stop it blowing all the paste out 5mins down the road? any ideas for getting it to hold? also what about using gaffertape?
its only gotta last a few weeks (n dont matter if i gotta do it a few times anyway) so not after anything sturdy
ideas? nomatter how stupid they may seem?
#3
PassionFord Post Troll
Join Date: May 2003
Location: Nr Crewe, Cheshire
Posts: 3,225
Likes: 0
Received 0 Likes
on
0 Posts
obtain one beer can.. and 2/3 jubilee clips...
Cut beer can so you are left with a flat piece of metal..
Wrap this around the blowing section of the exhaust (im assuming it isnt RIGHT on the join ) then do up the 2/3 jubliee clips arround the beer can.. hey presto fixed
Cut beer can so you are left with a flat piece of metal..
Wrap this around the blowing section of the exhaust (im assuming it isnt RIGHT on the join ) then do up the 2/3 jubliee clips arround the beer can.. hey presto fixed
#4
20K+ Super Poster.
Thread Starter
phil, top plan
but it is right at the join
stu, any idea of tha name of this stuff? not aryldyte is it? if it is, i didnt think you could use that on metal
but it is right at the join
stu, any idea of tha name of this stuff? not aryldyte is it? if it is, i didnt think you could use that on metal
#7
PassionFord Post Troll
Join Date: May 2003
Location: Nr Crewe, Cheshire
Posts: 3,225
Likes: 0
Received 0 Likes
on
0 Posts
oooo i got an idea!!!!
Get some filler... and some exhaust wrap... wedge a load of filler over the hole... (gaffertape if necessary to hold in place ).. wrap a small piece of exhaust wrap arround the filler to hold it in place
Seriously though you could do a semi profesional bodge and buy some 'exhaust tape' its like the paste but actaully wraps arround the exhaust so it doesnt fall off as soon as you go over a bump
Get some filler... and some exhaust wrap... wedge a load of filler over the hole... (gaffertape if necessary to hold in place ).. wrap a small piece of exhaust wrap arround the filler to hold it in place
Seriously though you could do a semi profesional bodge and buy some 'exhaust tape' its like the paste but actaully wraps arround the exhaust so it doesnt fall off as soon as you go over a bump
Trending Topics
#11
20K+ Super Poster.
Thread Starter
the exhaust wrap idea wounds a goodun... maybe cover it in the paste n then wrap it in with some tape stuff
might give that a try...
if not i'll just leave it
any more comedy sugestions phil as i like your style
might give that a try...
if not i'll just leave it
any more comedy sugestions phil as i like your style
#14
20K+ Super Poster.
Thread Starter
steve, catch me on MSN later n i'll tell ya... dont fancy posting too much on the BB as i'll get hurled with stupid comments from nobbers
but it will be <250bhp thats for sure
but it will be <250bhp thats for sure
Thread
Thread Starter
Forum
Replies
Last Post
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM
mk1focus
Ford Fiesta
3
24-09-2015 06:19 PM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM