Saph Boa turbo conversion!!
21-02-2013, 08:09 PM
#128
Picking clutch and power steering rack up on the 9th, get my gearbox dropped off from graham Monday/Tuesday as he's in France! ordered my powerflex bushes for car and msd solid beam mounts just now. As for propshaft after a chat with Ade500 earlier Im going too start build once the above bits are in my posession - mod the box bolt 2.8 flywheel to engine, ap 6paddle clutch too flywheel gearbox to engine then start full engine conversion and once all is done take my cossie diff and 4x4 mt75 diff to reco prop and have one made takes few days! As you can see above got my rear arms/engine cradle/mt75 rwd gearbox cradle back from powder coaters as soon as my bushes arrive (ordered tonight) will bolt together my rear beam,arms,diff,hubs,4x4 brakes!!!
Last edited by doga-ot; 03-03-2013 at 01:25 PM.
21-02-2013, 08:20 PM
#129
Fart of the Purniture
I've got loads of bits stashed away for mine but its about 20 miles from me at a friends garage - I've had to wait for the better weather for the welder bloke to go down there, he's doing another stint on the weekend.
I might do a thread on it here when I get going again.
It's a ballache at times but reckon it'll be worth it in the end.
Trouble is I'll have to get my other Saff (also a ghia) on the road before I take apart the 4x4, (as I've decided to use the 'known' engine out of that.) otherwise I'll have nothing to get to work in - and that means finding another RWD MT75 as it's an auto with a dodgy box
I might do a thread on it here when I get going again.
It's a ballache at times but reckon it'll be worth it in the end.
Trouble is I'll have to get my other Saff (also a ghia) on the road before I take apart the 4x4, (as I've decided to use the 'known' engine out of that.) otherwise I'll have nothing to get to work in - and that means finding another RWD MT75 as it's an auto with a dodgy box
21-02-2013, 08:29 PM
#130
I've got loads of bits stashed away for mine but its about 20 miles from me at a friends garage - I've had to wait for the better weather for the welder bloke to go down there, he's doing another stint on the weekend.
I might do a thread on it here when I get going again.
It's a ballache at times but reckon it'll be worth it in the end.
Trouble is I'll have to get my other Saff (also a ghia) on the road before I take apart the 4x4, (as I've decided to use the 'known' engine out of that.) otherwise I'll have nothing to get to work in - and that means finding another RWD MT75 as it's an auto with a dodgy box
I might do a thread on it here when I get going again.
It's a ballache at times but reckon it'll be worth it in the end.
Trouble is I'll have to get my other Saff (also a ghia) on the road before I take apart the 4x4, (as I've decided to use the 'known' engine out of that.) otherwise I'll have nothing to get to work in - and that means finding another RWD MT75 as it's an auto with a dodgy box
21-02-2013, 09:36 PM
#131
Fart of the Purniture
That's handy to know 
, I'm just trying to find somewhere a little closer - don't get me wrong - I'm up for a drive to get what I want but just biding my time, we also run a load of couriers out of work daily, so I'm seeing if one of the fella's minds picking one up if it's not too far out of there travels.
So, gotta sort three Sierra's out !
, I'm just trying to find somewhere a little closer - don't get me wrong - I'm up for a drive to get what I want but just biding my time, we also run a load of couriers out of work daily, so I'm seeing if one of the fella's minds picking one up if it's not too far out of there travels.So, gotta sort three Sierra's out !
more pics I'm almost ready got my engine hoist ready and waiting last few bits should be in my possession 9th of this month.
28-02-2013, 07:52 PM
#134
not sure bud if i'm honest so my plan if i have time (as i want car at Rs Central) is to get a 5th gear and syncro(just incase)its only Ł40 for diesel gearbox,and get someone to open it up and see for me and if its got normal 5th gear get it swapped.
I have actually had a really good day today (firm I work for owes me Ł1500 in expenses sinse last year and paid half in my account today out the blue) also had a txt today from someone wanting my FRS engine bits thats another Ł400 (all money towards car) then 30 min ago I get an email from a mate HE HAS A PROP FOR ME ......
HAPY would be an under statement,I should have all my bits by 9th now and I will start my conversion
WES
I have actually had a really good day today (firm I work for owes me Ł1500 in expenses sinse last year and paid half in my account today out the blue) also had a txt today from someone wanting my FRS engine bits thats another Ł400 (all money towards car) then 30 min ago I get an email from a mate HE HAS A PROP FOR ME ......
HAPY would be an under statement,I should have all my bits by 9th now and I will start my conversion
WES
03-03-2013, 01:35 PM
#137
Right fella just been (he came for all my FRS Engine bits I had) I sold him everything just too get rid for Ł650 happy days.... Also whilst doing my superflex bushes,shims,hubs and 4x4 vented rear brakes together when I went to bolt to rear beam I noticed something so got wire brush and took paint off beam 2x big cracks so that got scrapped yesterday got a near on new one I collecting after work tomorrow off a mate Jon, solid rear beam mounts should be here tomorrow.
Plan of action for next week end is go help R4NN,get my clutch/power steering rack then get my engine mounts,tca's flywheel bolts come home and put new roof on garage and should be starting full build the following week!! Hopefully car should be ready just in time for Rs Central day
Plan of action for next week end is go help R4NN,get my clutch/power steering rack then get my engine mounts,tca's flywheel bolts come home and put new roof on garage and should be starting full build the following week!! Hopefully car should be ready just in time for Rs Central day
04-03-2013, 07:47 PM
#139
Just home from picking up cossie rear beam in good condition minus a few scraps from bottoming out going to brush up seam weld some bits just to strengthen it up then some point next week i'll have it shot blasted and powdercoated! Ordered leather recaro interior yesterday should be here Wednesday if I'm home early enough i'll fit it.
WES
WES
10-03-2013, 01:04 PM
#145
Right happy days yesterday I removed R4nss T5 gearbox for him picked up my 2wd power steering rack and ap 6paddle racing clutch kit then thanks to Ade500 picked up engine mounts, 2.8 flywheel bolts and front tca's. Also bought a 2nd hand low milage 2.5 tdci transit mt75 gearbox for 5th gear and countershaft now at some point this week will take both my box's to a specialist my dad knows to have gear changed over! Also this week got to go Burton Powers for sump kit so I can pull off sump to check chain and guides, now have my propshaft and New starter motor, tie rod ends and standard gearbox mount. will update pics later or tomorrow.
WES
WES
lol
12-03-2013, 03:02 PM
#154
Ordered engine stand and gearbox sandwich plate, will be here Friday ready for me too start. Rear beam being strengthened and powdercoated red as I speak, and got totake my hybrid gearbox along with the 2.5tdci transit gearbox I have down to my dads gearbox friend to have 5th gear checked and swapped over should it be an ordinary one!
WES
WES
