Best place to get 400 bhp build on cossie engine ?
#2
20K+ Super Poster.
iTrader: (1)
MA DEVELOPMENTS
A1 RALLYSPORT
REYLAND
NMS
MSD
ETC ETC.........
I'm not entering in to who's best though Kev..
Kev, check this out mate.
https://passionford.com/forum/viewtopic.php?t=296577
A1 RALLYSPORT
REYLAND
NMS
MSD
ETC ETC.........
I'm not entering in to who's best though Kev..
Kev, check this out mate.
https://passionford.com/forum/viewtopic.php?t=296577
#3
Not welcome...
Join Date: Dec 2006
Location: South east...
Posts: 3,031
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best place to get 400 bhp build on cossie engine ?
Originally Posted by KSA-Cossie
Who's best and if poss prices too ?
#6
Sponsor
iTrader: (4)
Re: Best place to get 400 bhp build on cossie engine ?
Originally Posted by Gatecrasher
Originally Posted by KSA-Cossie
Who's best and if poss prices too ?
Trending Topics
#12
PassionFord Post Troll
Originally Posted by Charlie Chalk
Torque Of The Devil
are the people I'd use
and its strong and safe......
#14
PassionFord Post Troll
Originally Posted by Charlie Chalk
Chris didnt build her engine though? I never said anything about RR's LOL
When clearly thats not the case...
#27
PassionFord Post Troll
Originally Posted by Gatecrasher
Originally Posted by dingy
pmsl....
My Harvey engine was put together by cowboys.....
old record but still burns hard....
My Harvey engine was put together by cowboys.....
old record but still burns hard....
SCS.......Melted
NMS.......still running strong...
#29
Wahay!! I've lost my Virginity!!
Join Date: Oct 2007
Location: prestwick
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dingy
Originally Posted by Gatecrasher
Originally Posted by dingy
pmsl....
My Harvey engine was put together by cowboys.....
old record but still burns hard....
My Harvey engine was put together by cowboys.....
old record but still burns hard....
SCS.......Melted
NMS.......still running strong...
#30
Re: Best place to get 400 bhp build on cossie engine ?
Originally Posted by Gatecrasher
Originally Posted by KSA-Cossie
Who's best and if poss prices too ?
#32
Not welcome...
Join Date: Dec 2006
Location: South east...
Posts: 3,031
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dingy
Originally Posted by Gatecrasher
Originally Posted by dingy
pmsl....
My Harvey engine was put together by cowboys.....
old record but still burns hard....
My Harvey engine was put together by cowboys.....
old record but still burns hard....
SCS.......Melted
NMS.......still running strong...
Care to give a bit more info please?
#33
10K+ Poster!!
It didn't melt because it was built wrong, it was either mapping or another failure of some sort which led to the engine melting.
Has Mike R's car melted ? I certainly don't see Andrew Gallagher complaining about his engines
I don't for one minute hold anything against Karls engine building or mapping though
Lets be honest though Dingy, your seriously over specced engine couldn't even make 500hp a month ago, no wonder its been safe with a spec like that running only mild power
400hp can be done on a stock engine by just adding a few components, thats if your only looking for a figure of 400hp. If you want a nicer power delivery etc.. then you would need to start thinking about getting a cylinder head done and other bits BUT you can and it has been proven several times make near to 400hp on a stock engine
Has Mike R's car melted ? I certainly don't see Andrew Gallagher complaining about his engines
I don't for one minute hold anything against Karls engine building or mapping though
Lets be honest though Dingy, your seriously over specced engine couldn't even make 500hp a month ago, no wonder its been safe with a spec like that running only mild power
400hp can be done on a stock engine by just adding a few components, thats if your only looking for a figure of 400hp. If you want a nicer power delivery etc.. then you would need to start thinking about getting a cylinder head done and other bits BUT you can and it has been proven several times make near to 400hp on a stock engine
#35
PassionFord Post Troll
harveys engines are always made safe i watched him dyno my last engine that made 680bhp he said it could easily go to 700 but kept it safe.
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits
#36
10K+ Poster!!
Originally Posted by andrewg
harveys engines are always made safe i watched him dyno my last engine that made 680bhp he said it could easily go to 700 but kept it safe.
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits
Do you personally check them in car once fitted Andrew ?
#37
PassionFord Post Troll
Originally Posted by JonnyBravo
Originally Posted by andrewg
harveys engines are always made safe i watched him dyno my last engine that made 680bhp he said it could easily go to 700 but kept it safe.
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits
Do you personally check them in car once fitted Andrew ?
#39
Best place to get 400...
My mate had 411 bhp at INTERPRO . 3years ago has a escort cos Uses it every day and drives it hard . It has not failed him .Exellent work . Simon and dave . INTERPRO