Best place to get 400 bhp build on cossie engine ?
Who's best and if poss prices too ? :top:
|
MA DEVELOPMENTS
A1 RALLYSPORT REYLAND NMS MSD ETC ETC......... :D :top: I'm not entering in to who's best though Kev.. :cry: Kev, check this out mate. https://passionford.com/forum/viewtopic.php?t=296577 |
Re: Best place to get 400 bhp build on cossie engine ?
Originally Posted by KSA-Cossie
Who's best and if poss prices too ? :top:
|
Or as your in Scotland you wont get better than AVA up there :DD:
|
Standard engine does 400bhp so any engine builder.
Personally after using several tuners... There is only one i would use and thats Karl Norris.... |
Re: Best place to get 400 bhp build on cossie engine ?
Originally Posted by Gatecrasher
Originally Posted by KSA-Cossie
Who's best and if poss prices too ? :top:
|
you could prob go to 440-450 for not much more
|
Get Andy at AG Motorsport to build it and then you could use Stu @ MSD for mapping??
|
or harvey could dyno it
|
pmsl....
My Harvey engine was put together by cowboys..... old record but still burns hard.... |
MSD
NMS Field Motorsport Torque Of The Devil are the people I'd use |
Originally Posted by Charlie Chalk
Torque Of The Devil are the people I'd use and its strong and safe...... |
Chris didnt build her engine though? I never said anything about RR's LOL
|
Originally Posted by Charlie Chalk
Chris didnt build her engine though? I never said anything about RR's LOL
When clearly thats not the case... ;) |
Im not getting involved :mask:
:cry: |
oh and chris also said PE's rollers were accurate...
so go figure ;) |
again... :mask:
|
dingy
Any news on my Cheque? |
AM messing pal.....
personally don't care ;) ;) |
Originally Posted by Nash
dingy
Any news on my Cheque? U going monday ? |
Originally Posted by dingy
AM messing pal.....
personally don't care ;) ;) I don't, hence why I don't comment :donkey: |
shame ya not coming monday mate ;)
Am gonna get hammered by everything LOL |
No Dingy but Retro Al is and So is MikeR, just give it to them mate. Sure they wont mind.
Oh and i would build a 400bhp engine myself. |
seriously nash have sent u 2 cheques....have you not had it ?
I will sort you out, what do you want me to do ? |
Originally Posted by dingy
Standard engine does 400bhp so any engine builder.
Personally after using several tuners... There is only one i would use and thats Karl Norris.... |
Originally Posted by dingy
pmsl....
My Harvey engine was put together by cowboys..... old record but still burns hard.... |
Originally Posted by Gatecrasher
Originally Posted by dingy
pmsl....
My Harvey engine was put together by cowboys..... old record but still burns hard.... SCS.......Melted NMS.......still running strong... ;) |
dingy
Pm'd |
Originally Posted by dingy
Originally Posted by Gatecrasher
Originally Posted by dingy
pmsl....
My Harvey engine was put together by cowboys..... old record but still burns hard.... SCS.......Melted NMS.......still running strong... ;) |
Re: Best place to get 400 bhp build on cossie engine ?
Originally Posted by Gatecrasher
Originally Posted by KSA-Cossie
Who's best and if poss prices too ? :top:
|
just go for 500..like said ^^^^ 400 is standard and as for prices it all depends on how much you/they do........
|
Originally Posted by dingy
Originally Posted by Gatecrasher
Originally Posted by dingy
pmsl....
My Harvey engine was put together by cowboys..... old record but still burns hard.... SCS.......Melted NMS.......still running strong... ;) Care to give a bit more info please? :cry: |
It didn't melt because it was built wrong, it was either mapping or another failure of some sort which led to the engine melting.
Has Mike R's car melted ? I certainly don't see Andrew Gallagher complaining about his engines :? :top: I don't for one minute hold anything against Karls engine building or mapping though :cool: Lets be honest though Dingy, your seriously over specced engine couldn't even make 500hp a month ago, no wonder its been safe with a spec like that running only mild power :blabla: :cry: :DD: 400hp can be done on a stock engine by just adding a few components, thats if your only looking for a figure of 400hp. If you want a nicer power delivery etc.. then you would need to start thinking about getting a cylinder head done and other bits BUT you can and it has been proven several times make near to 400hp on a stock engine |
do it your self and save LOTS of money
|
harveys engines are always made safe i watched him dyno my last engine that made 680bhp he said it could easily go to 700 but kept it safe.
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits |
Originally Posted by andrewg
harveys engines are always made safe i watched him dyno my last engine that made 680bhp he said it could easily go to 700 but kept it safe.
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits Do you personally check them in car once fitted Andrew ? |
Originally Posted by JonnyBravo
Originally Posted by andrewg
harveys engines are always made safe i watched him dyno my last engine that made 680bhp he said it could easily go to 700 but kept it safe.
and he mapped the engine i built for the mk2 escort i'm doing on pump fuel it made 570 , you can see when its on the dyno its well within the limits Do you personally check them in car once fitted Andrew ? |
Ding dong dingy!
|
Best place to get 400...
:top: My mate had 411 bhp at INTERPRO . :banana: 3years ago has a escort cos :clap: Uses it every day and drives it hard . :cool: It has not failed him .Exellent work . Simon and dave . :top: INTERPRO :top:
|
Julian Godfrey :top:
|
All times are GMT. The time now is 02:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands