ZETEC TURBO ENGINE
#1
PassionFord Post Troll
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: SHEFFIELD
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
my unfinished project is going in pieces
spec
new block
accralite pistons 7.8 cr
farndon steel rods
fully balanced bottom end
ex developement cylinder head, 30% larger inlet ports oversize valves
cutom manifold machined to accept cosworth sensors
flywheel lightened & balanced & machine to suit coworth crank pick up
adapted engine mount & alternator
wrc style tublular exhaust manifold & custom stainless exhaust to suit cosworth based turbo, this was fitted to f55 soy.
new oil pump,water pump etc
ford multilayer head gasket
new ford main & bigend bearings
correct sump & pick up
all parts except exhaust system are new just needs assembling for final build.
have receipts for rods & pistons plus some of tha machinework totaling £2300 all together has cost me in excess of 5k
all it will need to is a cosworth mangement system
price is £2500 & I will include a nearly new ap paddle clutch that was balanced along with the rest of the bottom end.
call 07747 072489
![](https://img.photobucket.com/albums/0803/IANS2RST/ztengine3.jpg)
![](https://img.photobucket.com/albums/0803/IANS2RST/ztengine2.jpg)
![](https://img.photobucket.com/albums/0803/IANS2RST/ztengine1.jpg)
c
spec
new block
accralite pistons 7.8 cr
farndon steel rods
fully balanced bottom end
ex developement cylinder head, 30% larger inlet ports oversize valves
cutom manifold machined to accept cosworth sensors
flywheel lightened & balanced & machine to suit coworth crank pick up
adapted engine mount & alternator
wrc style tublular exhaust manifold & custom stainless exhaust to suit cosworth based turbo, this was fitted to f55 soy.
new oil pump,water pump etc
ford multilayer head gasket
new ford main & bigend bearings
correct sump & pick up
all parts except exhaust system are new just needs assembling for final build.
have receipts for rods & pistons plus some of tha machinework totaling £2300 all together has cost me in excess of 5k
all it will need to is a cosworth mangement system
price is £2500 & I will include a nearly new ap paddle clutch that was balanced along with the rest of the bottom end.
call 07747 072489
![](https://img.photobucket.com/albums/0803/IANS2RST/ztengine3.jpg)
![](https://img.photobucket.com/albums/0803/IANS2RST/ztengine2.jpg)
![](https://img.photobucket.com/albums/0803/IANS2RST/ztengine1.jpg)
c
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post