Here is a tidied up version of pretty much what parts I have left......


AH Fabrications Single Pass Cooler Kit. This was made to my design and based around my precise set-up. You will need to cut semi-circular holes in the front panel for the pipes to pass through, but these are not visible once the bumper is on, I can supply pictures of this if you buy it. I would suggest that you may need to modify the pipework, depending entirely on where your turbo is etc. It has light fin damage, I caught it with the pressure washer and straightened it out, but its nothing serious. I'll include the bottom pipe which should close to a direct fit I'd have thought. The top pipe won't be hard to adapt from whatever you have now (it's close to standard position) Was £350 - Now £295






Camshaft Position Sensor kit, used for management conversions. Included is the bracket, bolts, sensor, pickup ring and machined Piper vernier Pulley (to suit the kit). £100




EFi Coil Pack (virtually new) - £25




'90 Spec Dash. MINT condition. Has Clifford LED fitted on the top, in the centre. I'm sure its uncut apart from that though, no Glovebox included. £50

Spal 11” Slimline Fan x 2 - £50 each

Series 1 Vibratechnics competition gearbox mounts (as new) - £65

Smoked Rear Lights - £25 (pair)

Pair of Brand New Weather Strips (the ones that go on the A-Pillar). I believe these are now discontinued - Price TBA

Standard Wheel with original 195/50/15 Goodyear Eagle GS-D+ tyre (was my spare, did one 5 mile journey EVER) - £30

Parcel Shelf (excellent condition but missing one of the rubber hanger wotsits) - £30

Team Dynamics Pro Race 2 7x16” Wheels. These are in fairly good condition on the faces, no kerb damage, but the fronts have got quite heavy damage on the inside where stones got trapped between the caliper and wheel. I have included 205/45/16 Goodyear Eagle GSD3 tyres that have done very little mileage. They have no centre-caps, I never ran them. Priced to reflect condition. - Was £375 - Now £295 See HERE for more details and pics.

MTX Mounts/Brackets/Shifter etc. This is a box of bits intended to give you a good starting point if you want to fit the early RS2000 style MTX gearbox. It is NOT intended to be a bolt-on kit. Included is the rear mount (2 parts) and Billet Alloy front mount (1 part). It does not include the 2nd part to the front mount which will need to be made and welded to the Chassis. You'll also need a pair of S1 style gearbox mounts. I'll also include the drivers-side mount, hybrid shifter I used (this was temporary and is a combination of standard RST and RS2000, but it is worn), the clutch cable/arm. Please remember that my engine was lowered 30mm, but you can probably adapt these parts if you want to run standard height. I will also throw in the dummy driveshaft I made, which can be used to test fit, then get made properly - £100 for the lot



I'll try and complete this thread with pics of what I have left this week.


Postage (small parcels) - £5.00 First Class. £7.50 Special Delivery - (bigger stuff) - £10.00 Courier - Check with me if its unclear.

 

Thread amended to included whats left of the car.

 

God I want this manifold. Someone buy my MK3 shell!!! Would it take much to spin my T34 round to fit (standard RST orientation at the mo).
Jon

 

I'll have the oil line and filter pal.
Send me your addy to send the dosh through.
Jon

 

It only needs the housing spinning, it's easy!! Just loosen the 6 bolts and tap it round with a hammer. Same with the compressor housing. It's easy peasy!!

 

is that everything thats left? im after a roof clock, and a front+ rear demister switch

thanks

 

Buy the manifold and I'll throw the oil line in for a tenner. £470 posted for the lot.

 

They're going on the shell I'm afraid.

 

I need to sell my mk3 shell pall then I would be straight on it.
jon

 

PM sent

 

what colour does the stack light up?

 

White.

 

Christian

I'll take a pair of the wheel spacers. Paypal ok? If so please PM me a complete price including postage (S75)

Thanks.....

 

EFi Fuel Rail including adaptor for remote regulator

Christian, where can you buy the adaptors from mate ?

 

The engine needs to sell. It'll be open to offers soon. If anyone wants to make an offer.......

 

Hang on to the manifold pal. I have someone on my shell.
Jon

 

any pics of the lights?

 

Jamie - I will sort it as soon as possible.

Wheels are now for sale, with pics.

https://passionford.com/forum/alloy-...ce-2-7x16.html

 

will you sale manifold for £400 cheers?

 

Hi mate,

I'll have these off you - Eibach Alloy Hubcentric Spacers 5mm each - £15 per pair 1 pair left.

How much posted and how do you want payment?

 

Too late. Sorry. It's sold (pending payment)

£20 First Class Recorded, £22.50 Special Delivery.

Paypal or bank transfer!

 

 

I hope the manifold didn't go for what the end price was on eBay! What a travesty.

 

No, I would have NEVER let that happen! I'd have kept it as a doorstop before letting it go for that!

It still sold for less than I had originally hoped, but hey-ho!

 

christian, you know you modded that there exhaust manifold, do you have a template for the rs turbo head for the flange ?

jim

 

Jim, that has to go down in history as one of THEEEE most stupid questions ever.

Here is my template......





Commonly available from Ford, it's known as an exhaust manifold gasket.

 

i didnt know if it was different to this !

im new to this cvh malarky lol, cheers !

 

Your father would be so proud.

It's that simple, fella. Put that into a machine shop and say 'I want one of these, please", in whatever thickness you decide on, 13mm at least though IMO.

They could go 2-3mm extra width all the way round it, to give a bit more 'meat' if you wanted.

 

pmsl

cool cheers for that

 

I'll have them. Please PM me your paypal details. I'll pay the charges at my end so you'll get the full £22.50.

thanks

 

YHPM.

 

List updated.