Full Zetec 1.8 16v Turbo Engine With Brand New Megasquirt Ecu
21-03-2008, 09:22 PM
#1
Full Zetec 1.8 16v Turbo Engine With Brand New Megasquirt Ecu
HERE WE HAVE FOR SALE A 1.8 ZETEC TURBO ENGINE MINUS A TURBO.
IVE SPENT A FEW QUID ON THIS ENGINE THE SPEC IS AS FOLLOWS PLEASE READ CAREFULLY BEFORE YOU PM ME ASKING A QUESTION
1.8 ZETEC BOTTOM END FULLY STRIPPED DOWN CLEANED INSPECTED THE BORES WERE HONED AND BRAND NEW PISTON RINGS FITTED ALONG WITH OIL JETS FOR THE PISTONS,SUMP GASKET AND BIG END SHELLS.
HEAD IS OFF A 2 LITRE MONDEO LOW MILEAGE AND IS THE 130 BHP ONE IT HAS A DECOMPRESSION PLATE WITH 2 STEEL HEADGASKETS, NEW HEADBOLTS ETC
THE CAMCOVER HAS BEEN RESPRAYED MERCURY GREY AS IS THE CHARGE CARRIER FROM MY SERIES 2
IT HAS FOCUS RS SPARKPLUGS NEW LEADS,WATER PUMP,TIMING BELT ETC
I ALSO HAVE INCLUDED WITH THE ENGINE A BRAND NEW MEGASQUIRT ECU IT COST ME 300 QUID ITS ALL BUILT UP READY TO GO
I ALSO PURCHASED A FIESTA TURBO INLET MANIFOLD AND NISSAN 200 SX INJECTORS
IVE ALSO GOT A EXHAUST MANIFOLD ADAPTOR PLATE FROM FERRIDAY ENGINEERING SO YOU CAN USE AN RS TURBO EXHAUST MANIFOLD ETC
ALLTOGETHER THIS HAS SKINNED ME MORE THAN A GRAND AND TRUST ME I HAVE EVERY SINGLE RECEIPT DOWN TO A GASKET THE PRICE IS 750 NO OFFERS THE ENGINE HAS JUST BEEN BUILT AND ITS NOT EVEN BEEN FITTED SO SAVE YORSELF A FEW QUID LIKE I SHOULD HAVE LOL IM OFFSHORE AT THE MO BUT IL BE BACK IN ABOUT 10 DAYS PM ME WITH ANY QUESTIONS OR EMAIL ME DIRECT ITS RYANINGRAM08@HOTMAIL.CO.UK
IVE SPENT A FEW QUID ON THIS ENGINE THE SPEC IS AS FOLLOWS PLEASE READ CAREFULLY BEFORE YOU PM ME ASKING A QUESTION
1.8 ZETEC BOTTOM END FULLY STRIPPED DOWN CLEANED INSPECTED THE BORES WERE HONED AND BRAND NEW PISTON RINGS FITTED ALONG WITH OIL JETS FOR THE PISTONS,SUMP GASKET AND BIG END SHELLS.
HEAD IS OFF A 2 LITRE MONDEO LOW MILEAGE AND IS THE 130 BHP ONE IT HAS A DECOMPRESSION PLATE WITH 2 STEEL HEADGASKETS, NEW HEADBOLTS ETC
THE CAMCOVER HAS BEEN RESPRAYED MERCURY GREY AS IS THE CHARGE CARRIER FROM MY SERIES 2
IT HAS FOCUS RS SPARKPLUGS NEW LEADS,WATER PUMP,TIMING BELT ETC
I ALSO HAVE INCLUDED WITH THE ENGINE A BRAND NEW MEGASQUIRT ECU IT COST ME 300 QUID ITS ALL BUILT UP READY TO GO
I ALSO PURCHASED A FIESTA TURBO INLET MANIFOLD AND NISSAN 200 SX INJECTORS
IVE ALSO GOT A EXHAUST MANIFOLD ADAPTOR PLATE FROM FERRIDAY ENGINEERING SO YOU CAN USE AN RS TURBO EXHAUST MANIFOLD ETC
ALLTOGETHER THIS HAS SKINNED ME MORE THAN A GRAND AND TRUST ME I HAVE EVERY SINGLE RECEIPT DOWN TO A GASKET THE PRICE IS 750 NO OFFERS THE ENGINE HAS JUST BEEN BUILT AND ITS NOT EVEN BEEN FITTED SO SAVE YORSELF A FEW QUID LIKE I SHOULD HAVE LOL IM OFFSHORE AT THE MO BUT IL BE BACK IN ABOUT 10 DAYS PM ME WITH ANY QUESTIONS OR EMAIL ME DIRECT ITS RYANINGRAM08@HOTMAIL.CO.UK
23-03-2008, 01:11 PM
#5
yeah mate they are standard the engine is good for about the 200 mark my mate has built three of these engines one for me and two for himself which he ran in seperate cars his most recent one he has ran for a year with no problems and had the car dynod at 205 bhp the one before was crashed oops
23-03-2008, 02:08 PM
#6
PassionFord Regular
Join Date: Oct 2005
Location: Hertfordshire
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
yeah mate they are standard the engine is good for about the 200 mark my mate has built three of these engines one for me and two for himself which he ran in seperate cars his most recent one he has ran for a year with no problems and had the car dynod at 205 bhp the one before was crashed oops
plus have got a picture of the injectors as i sure they have different plugs and length
Thread
Thread Starter
Forum
Replies
Last Post
big_Rad
General Car Related Discussion.
8
15-09-2017 09:36 AM
