S1 S2 16i and XR3 bits
#1
S1 S2 16i and XR3 bits
S1 intercooler. £5
GSXR750 throttle bodies with manifold for zetec head. £240
Zetec 4 branch exhaust manifold (4-2-1), £70
2.0ltr Zetec blacktop engine, only done 30k, new timing belt and plugs fitted. £300
S2 inlet manifold complete £30
S2 red fuel lines. £20
S2 servo and master cylinder c/w linkage £30
S2 rear drums £20
Motorcraft front struts, less than 2000 miles on them £30
Koni rear struts still in good condition £40
No reasonable offer refused.
MK3/4 escort pedal box with mk6 clutch pedal and new ford ratchet, essential for paddles clutches.
Front inner and outer tca,front arb and rear tie bar bushes £85 delivered
S1/16i gearbox mount arms, £30
16i/xr3 2 bolt strutbrace £40
Will probably add more bits in the next few days.
GSXR750 throttle bodies with manifold for zetec head. £240
Zetec 4 branch exhaust manifold (4-2-1), £70
2.0ltr Zetec blacktop engine, only done 30k, new timing belt and plugs fitted. £300
S2 inlet manifold complete £30
S2 red fuel lines. £20
S2 servo and master cylinder c/w linkage £30
S2 rear drums £20
Motorcraft front struts, less than 2000 miles on them £30
Koni rear struts still in good condition £40
No reasonable offer refused.
MK3/4 escort pedal box with mk6 clutch pedal and new ford ratchet, essential for paddles clutches.
Front inner and outer tca,front arb and rear tie bar bushes £85 delivered
S1/16i gearbox mount arms, £30
16i/xr3 2 bolt strutbrace £40
Will probably add more bits in the next few days.
#6
Originally Posted by Coldo
David matey, ive lost your number, anychance you could PM me it.
Looking for a good condition radiator for the S2, and some other odds an ends, but the rad is urgent.
Cheers sirr
Looking for a good condition radiator for the S2, and some other odds an ends, but the rad is urgent.
Cheers sirr
david pmd
#7
tim turbo Its is all complete still bolted to the head, will be OFAC.
Coldo No radiators im afraid mate, tel no is 07811 154251.
rst mark It was rebuilt by my mate Andy (andy mac on here) He is an ex ford mechanic who does a lot of my work for me, its and LSD box but no receipts.
Make of the exhaust I dont know, throttle bodies will get you a picture as well.
Jambo I pm'd you back mate.
Coldo No radiators im afraid mate, tel no is 07811 154251.
rst mark It was rebuilt by my mate Andy (andy mac on here) He is an ex ford mechanic who does a lot of my work for me, its and LSD box but no receipts.
Make of the exhaust I dont know, throttle bodies will get you a picture as well.
Jambo I pm'd you back mate.
Trending Topics
#8
Originally Posted by JamboRST
Originally Posted by Coldo
David matey, ive lost your number, anychance you could PM me it.
Looking for a good condition radiator for the S2, and some other odds an ends, but the rad is urgent.
Cheers sirr
Looking for a good condition radiator for the S2, and some other odds an ends, but the rad is urgent.
Cheers sirr
david pmd
Jambo, the end tanks are fine. My engine mounts are busted, so the engine has rocked an burst the radiator, not holding any water , just pisses out as quick as i can put it in.
You know any local places that will do it? Local to Glasgow/kilmarnock anyway?
Cheers bud
#10
Originally Posted by Coldo
Originally Posted by JamboRST
Originally Posted by Coldo
David matey, ive lost your number, anychance you could PM me it.
Looking for a good condition radiator for the S2, and some other odds an ends, but the rad is urgent.
Cheers sirr
Looking for a good condition radiator for the S2, and some other odds an ends, but the rad is urgent.
Cheers sirr
david pmd
Jambo, the end tanks are fine. My engine mounts are busted, so the engine has rocked an burst the radiator, not holding any water , just pisses out as quick as i can put it in.
You know any local places that will do it? Local to Glasgow/kilmarnock anyway?
Cheers bud
they had them in stock today when i was in,£82 exchange
3 Milnbank St, Dennistun, Glasgow, Lanarkshire G31 3AQ
Tel: 0141 554 5281
#24
alright how much for the bumpes and will you bring them to wiltshire for a price wb or add me on msn badboy_rich@hotmail.co.uk
#29
Originally Posted by RodgeRS_Turbo
anyone knwo what make that exhaust is?
Your welcome to come and have a look at it mate.
Thread
Thread Starter
Forum
Replies
Last Post
TPM961
Restorations, Rebuilds & Projects.
19
15-01-2018 10:50 AM
Focosmitch
Ford Focus RS Parts for Sale.
5
09-03-2016 01:03 PM
Focosmitch
Ford RS Cosworth Parts for Sale
5
03-11-2015 04:08 PM