FletchCossie

iTrader: (4)

I've decided to offer my car with everything apart from engine, Autronics, gearbox and rear diff. These will be offered separately and car not stripped till engine or chassis sells.

Engine/Transmission:
XS Power Alloy radiator
Pro Alloy intercooler
Black Samco Hoses (Full kit)
Bailey power steering tank
Bailey header tank
Bailey swirl pot
Reyland hydraulic clutch conversion
Genuine Ford battery with round terminal conversion
GGR full through 3 inch exhaust system

Underneath:
Standard 2wd rear beam with beam to chassis poly Powerflex bushes
Poly Powerflex rear anti roll bar bushes
MSD poly/alloy rear diff mount
New Ahmed rear springs
New rear Koni shocks
New front Powerflex anti roll bar poly bushes
New front Powerflex outer TCA bush
Adjustable front track control arm's
Bilstein front coilovers (Refurbed about 2000 miles ago)

Interior:
Very rare green hex front and rear seats
Defi Oil temp, Exhaust gas temp, water temp and fuel pressure gauges
Stack wideband lambda gauge
Momo steering wheel with correct boss for this car
Fully working interior clock (Usually have screen issues)

Exterior:
Delete aero from factory (No spoiler)
18x8 Compomotive Mo wheels
New 225/40/18 tyres

Brakes:
Front 330mm AP 4 pots
Rear 300mm disk upgrade with standard calipers
Braided brake lines up to front and rear calipers

Security:
Toad Cat 1 alarm
Tracker (Kept on charge with a new battery backup fitted 18 months ago)

Problems:
Rear beam brake lines are corroded and could do with replacing (Surface rust only)
Rear bumper needs painting due to paint flaking off
Blistering on rear lower spoiler
Few marks/scratches around bodywork with 1/2 small dents
Needs tracking done
No MOT
No TAX
£8,500ono
Contact me (Steve) on 07732 872 122 if interested.

MAD 491bhp spec engine
7.5-1 comp
26mm inlet and 25mm exhaust ports
Mad inlet cam stock exhaust cam
Long studs 6 and wrc head gasket
Isky springs
TT T38 turbo
4x4 exhaust manifold
Small turbo Escort Cosworth inlet manifold
1000cc injectors
2wd SCS big wing sump
Anthracite cam cover with breather port
£5000ono

Autronic SM4 ECU (Mapped for this engine)
Full Ryan looks wiring loom
High/Low boost
Anti lag
£6000ono with the engine

T5 2wd gearbox (No bell housing) - £450
T5 2wd gearbox bell housing modified for hydraulic clutch - £50
Shortened prop for Escort Cosworth RWD conversion - £100
2wd 7.5inch RWD diff (Spins both wheels everytime) - £250

Contact me (Steve) on 07732 872 122 if you require more info or pics. Engine can currently be seen running.




























Loads of pictures of the Escort over the years can be found here:
http://smg.photobucket.com/albums/07...rt%20Cosworth/

tee-rex

p.m. sent prop and bell housing

Paul500+

iTrader: (1)

first on the diff mount please
how much ?

cossie891

iTrader: (1)

Wish I had the cash to buy the whole car

FletchCossie

iTrader: (4)

Cars not being stripped till engine or shell has sold thanks lads

Paul500+

iTrader: (1)

let me know when the msd diff mount is for sale if you strip it
think your mad getting rid keep hold of it m8

FletchCossie

iTrader: (4)

Will do mate I have not used the car in a long time so no need for it really

Glenn_

iTrader: (1)

Looks a nice cat.Shame its getting stripped.

FletchCossie

iTrader: (4)

Thanks mate

JOHNDQ

So what do we get for 8.5k mate! What is the floor pan etc like? Had or need any welding? Also is it running on RC injectors?

Thanks John

IveGotaCosworth

Hi Steve

Could i have a price on the header tank, oil breather tank and pipes, the Reylands hyd Clutch kit and the samco hoses please?

Thanks

Andrew

FletchCossie

iTrader: (4)

Everything apart from engine, management, gearbox and diff. I think I've listed everything it comes with more or less above? I've never had the car welded since purchase in 2004 and its never been an advisory on any mot. The sills have surface rust, but a good clean up should see that all away. I was gonna get the underside painted, but never got round to it

FletchCossie

iTrader: (4)

Hi Andrew, will get back to you if I break the car, but nothing will be sold till shell or engine sells

booner999

Hello mate, can I have first dibs on the wing vent covers please if they are standard items

thanks

Mark

Glenn_

iTrader: (1)

How much for a front heated screen switch posted please.

DaancosNL

Im interested in the ecu and wiringloom. please contact me if you want to sell serapately.

FletchCossie

iTrader: (4)

Sorry gents, just spotted this. I havent get time to break it yet and really wanna sell the engine first before she gets stripped. Ive got people interested in bits, so would offer everything in first come first serve basis

cozi500

How much for the front coilovers mate, pm me with details cheers

steff19

did you say how much you was after for the shell? not rolling but with panels and bumpers etc.

FletchCossie

iTrader: (4)

Cozi, not being broken yet mate as stated above

Steff, will reply to you text in a min

2wd

Hi .. what is the condition on the T-5, ..... noice, miles and so on .. ? Just to know it if you break it ..