18" Compomotive alloys w/tyres, 2wd Cylinder head, rs 500 intercooler
#1
Too many posts.. I need a life!!
Thread Starter
iTrader: (4)
Join Date: Apr 2006
Location: isle of wight
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
18" Compomotive alloys w/tyres, 2wd Cylinder head, rs 500 intercooler
WHEELS SOLD
2wd Cylinder head which has piper venier pulleys with bd10s installed. Head measures 138.3mm. It is complete and has had some polishing/porting done to the ports, given that the polishing doesnt look like it was the best of jobs. All in all its in great condition, I am just changing back to a 4wd head so have no use for it. Ideally head just needs a skim but it may be a good idea to get valve stems replaced while its out, but I will leave that down to the buyer. £450 posted UK (note that the cam carrier nuts are off in the pics, this is because I was going to use the cams in my new head, but have since sorted out some others, the cams will be torqued down to correct pressures before sending, also head will be fully cleaned)
Last I have a rs 500 intercooler. This was fitted in my saph 4x4 hence why the pipe has been cut to fit up to a sweedish plenum. I think I do have the orignal piece of pipe I cut off which I will try hook out in the week and include with the sale, if not you just need a piece of pipe ali welded on. The cooler is fine to use as it is, but I can understand someone wanting to put the pipe back to the full length. This is the inlet side only, the turbo side is uncut. £170 posted uk. I do have a couple more pics of cooler which I will put up later as photobucket is being a complete shag pile at the moment.
Any questions please ask or PM. Thanks
2wd Cylinder head which has piper venier pulleys with bd10s installed. Head measures 138.3mm. It is complete and has had some polishing/porting done to the ports, given that the polishing doesnt look like it was the best of jobs. All in all its in great condition, I am just changing back to a 4wd head so have no use for it. Ideally head just needs a skim but it may be a good idea to get valve stems replaced while its out, but I will leave that down to the buyer. £450 posted UK (note that the cam carrier nuts are off in the pics, this is because I was going to use the cams in my new head, but have since sorted out some others, the cams will be torqued down to correct pressures before sending, also head will be fully cleaned)
Last I have a rs 500 intercooler. This was fitted in my saph 4x4 hence why the pipe has been cut to fit up to a sweedish plenum. I think I do have the orignal piece of pipe I cut off which I will try hook out in the week and include with the sale, if not you just need a piece of pipe ali welded on. The cooler is fine to use as it is, but I can understand someone wanting to put the pipe back to the full length. This is the inlet side only, the turbo side is uncut. £170 posted uk. I do have a couple more pics of cooler which I will put up later as photobucket is being a complete shag pile at the moment.
Any questions please ask or PM. Thanks
Last edited by fatmike; 29-08-2011 at 05:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post