200 block, crank, few other bits
#1
200 block, crank, few other bits
ive been holding this off for as long as possible as i really wanted to get it finished but with my escos return i carnt keep it in the garage for any longer
all parts listed in BLUE are not available until next week due to being at powder coaters or at my friends, but if your interested in that part iwill put your name down until you see a pic to see if you want that item
big parts collection only, prices do not include postage, i am open to offers but please dont take the piss, as im breaking this to fund a new car
pics available on request of all items if i have it here, but i should have all parts back to me by end of next week
heres a link to my resto thread of the car so you can see most items
https://passionford.com/forum/restor...12-4-11-a.html
PARTS
4wd 200 block, std bore, has slight lip, includes main caps, has one small crack on one headbolt hole, non turkish 89 stampped £500
4wd crank, has slight scoring on one journal, so may need a grind or get away with a polish i dont know, smalls ends measure 52mm big ends measure 57mm £300
f
4wd engine cradle powder coated silver £30
4wd front hub carriers only, ready for bearings and painting £50
rouse sport sideskirts £200 slight crack in one very hard to find
under headlight strip no wiper cutouts for twin head lights £10
compomotive old style mos et33, with almost new 215/35/18 tyres these will be the last thing to sell as im using them still lol, but i have someone with first refusal, they will be fully refurbbed and balanced before sale aswell £1000
adjustable colom cowling £10
all parts listed in BLUE are not available until next week due to being at powder coaters or at my friends, but if your interested in that part iwill put your name down until you see a pic to see if you want that item
big parts collection only, prices do not include postage, i am open to offers but please dont take the piss, as im breaking this to fund a new car
pics available on request of all items if i have it here, but i should have all parts back to me by end of next week
heres a link to my resto thread of the car so you can see most items
https://passionford.com/forum/restor...12-4-11-a.html
PARTS
4wd 200 block, std bore, has slight lip, includes main caps, has one small crack on one headbolt hole, non turkish 89 stampped £500
4wd crank, has slight scoring on one journal, so may need a grind or get away with a polish i dont know, smalls ends measure 52mm big ends measure 57mm £300
f
4wd engine cradle powder coated silver £30
4wd front hub carriers only, ready for bearings and painting £50
rouse sport sideskirts £200 slight crack in one very hard to find
under headlight strip no wiper cutouts for twin head lights £10
compomotive old style mos et33, with almost new 215/35/18 tyres these will be the last thing to sell as im using them still lol, but i have someone with first refusal, they will be fully refurbbed and balanced before sale aswell £1000
adjustable colom cowling £10
Last edited by xr4x4rs; 20-06-2011 at 10:49 AM.
#3
PassionFord Post Whore!!
Really interested in the seats, but too far away from me, bloody 3 hour drive each way!!!!
Damn.
Any way of meeting nearer or posting etc?
Damn.
Any way of meeting nearer or posting etc?
Last edited by jason_nike; 26-05-2011 at 09:13 PM.
Trending Topics
#8
PassionFord Post Whore!!
#17
mr c escos cooler has an angled pipe instead of straight like sierras do, i have someone interested in it already but ill giveyou second shout, as i think its the way its been modded will put people off even though it was fine ona car like this for many years but pics will be up later of almost everything
dojj i have a pic of the fuel lines, though there not brilliant hence price
dojj i have a pic of the fuel lines, though there not brilliant hence price
#23
Too many posts.. I need a life!!
twin head light conver
ive been holding this off for as long as possible as i really wanted to get it finished but with my escos return i carnt keep it in the garage for any longer
all parts listed in BLUE are not available until next week due to being at powder coaters or at my friends, but if your interested in that part iwill put your name down until you see a pic to see if you want that item
big parts collection only, prices do not include postage, i am open to offers but i wont be budging much as im having to break this to fund a new car for a run around
pics available on request of all items if i have it here, but i should have all parts back to me by end of next week
heres a link to my resto thread of the car so you can see most items
https://passionford.com/forum/restor...12-4-11-a.html
PARTS
200 4wd engine minus inlets and turbo, just had valve stem seals, new head gasket and cambelt, std bore, needs a water pump as i snapped a bolt in pulley will break if enough interest as head just had its first skim, just looking into prices of engines complete like this and in bits
4wd inlet manifold both parts, powder coated satin black £80
4wd throttle body complete £40
2wd bailey header tank powder coated satin black £80
bailey mirror image breather tank with -10 quip fittings in satin black £ £60
on hold fezzjsy
water swirl pot in satin black £40
pro alloy rs500 intercooler, been modded to fit escos some sort of sealent £150
std rad £40
escos rad fans, need connector £50
4wd rear beam and arms only, powdercoated blue and silver, includes all bolts, new poly bushes bar roll bar, also adjustable drop links, arms have been modded for strength where shock mounts, drop links alone are £120, im asking £180 for the lot
rear hubs with new wheel bearings fitted £100
4wd rear diff, cleaned and painted, needs oil £100
alloy diff mount with conversion bolts £80 on hold iain
4wd rear driveshafts new joints and gaitors £100
fuel tank powdercoated silver £40 complete with sender
fuel pump cradle, powder coated silver needs bobbins to put together £50
4wd mt75 gearbox, modded for hydraulic clutch missing clutch arm, includes gearstick and alloy cradle bushes, missing front prop £300
gearbox mount powdercoated black £20
gearbox mount £10
vibratechnic engine mounts £60
4wd engine cradle powder coated silver £40
4wd engine mount arms powdercoated silver £10
4wd front hubs with new bearings £150
xr4x4 front shafts, need new gaitors £60
rear beam disc back plates powder coated black £20
2wd full p/s pipes no leaks £30 on hold
p/s pump £20
philloy twin bar strut brace with custom coil pack bracket £80 on hold kitchen devil
complete set of poly bushes for front £30
metal fuel lines underneath painted silver £20 includes new clips
4wd gaz gold coilovers done 2k £600
4wd steering rack, new gaitors and alloy bushes £50
4wd front diff 360
uprated braided fuel pump loom £30
uprated braided fan loom £30
full interior plastics for a xr4x4 that have been flocked by raj at autoflock motorsport, only thing that wasnt done was the centre console as i sent the wrong one, but this can be done for £50 he said so will supply the console, all this will fit a saf aswell, only the parcel shelf holders wont fit
will include door cards which have carbon inserts i made, not brilliant but this car was my first attempt at carbon work £300 only parts that arnt available are the roof parts and no interior handles or a pillars, door cards have had speaker pods screwedinto them so will have some small holes in them, unless you want the speaker pods with interior which ill chuck in
rouse style winged seats and back seats, little bit of wear back seats has a small slit in it, these are as close your gona get to genuie rouse seats,a lso have carbon side panels £300
ALL CARBON WORK WAS MY 1ST ATTEMPT SO IS NOT PERFECT AND DOES HAVE DEFECTS, LIKE SOME HOLES OR ORIGINAL PART SHOWING THROUGH IF YOU LOOK CLOSE
carbon outer door handles, do show some plastic where the weave had been rubbed through or seprated but only if you look close £40
outer door triangles, carbon has lifted in some places £20 on hold rslubby
inner door triangles 3 of no mirror control one £30
ecu cover carbon covered not brilliant £20
fog light surrounds in carbon covered not bad £20 hold rslubby
interior door handle trim pieces in carbon ok condition some mistakes £20
black roof lining for hatchback, includes flocked handles and sunroof handle panel, aswell as sun visors, also includes sunroof which has a black insert £80
twin pod gauge holder flocked in black, will supply other side a pillar to match the flock £50
complete boot install for hatchback, includes 2x 12 inch subs, 3 amps and all wiring and 6x9s £300
hatchback smoked rear lights £20
hatchback number plate panel £10
cosworth front bumper, with fogs and towing eye, has had aerao catches built in for quick release and mounting, will supply brackets that bolt to wings to mount bumper £150
rouse sport front splitter in satin black, slight scuff £80
rouse sport sideskirts £250 slight crack in one very hard to find
hatchback rear bumper with rs valance £50
carbon covered mirror covers £40
under headlight strip no wiper cutouts for twin head lights £10
rear prop good bearing £20
4wd prop doughnut £50
4wd vented bonnet £60
grill £10
bailey p/s tank in satin black £60 hold rs lubby
compomotive old style mos et33, with almost new 215/35/18 tyres these will be the last thing to sell as im using them still lol, but i have someone with first refusal, they will be fully refurbbed and balanced before sale aswell £1000
map sensor bracket in black £15
strut topmounts in black £10
i will also have a few other parts but need to go round my friends to see what i have there lol
also have all switches, looms, glass, locks etcm adjustable steering coloms, brake servos, i dont have any boost hoses or water hoses sorry, when i get more parts i will list them, anything not on the list please contact me and ill see if i have it or not
all parts listed in BLUE are not available until next week due to being at powder coaters or at my friends, but if your interested in that part iwill put your name down until you see a pic to see if you want that item
big parts collection only, prices do not include postage, i am open to offers but i wont be budging much as im having to break this to fund a new car for a run around
pics available on request of all items if i have it here, but i should have all parts back to me by end of next week
heres a link to my resto thread of the car so you can see most items
https://passionford.com/forum/restor...12-4-11-a.html
PARTS
200 4wd engine minus inlets and turbo, just had valve stem seals, new head gasket and cambelt, std bore, needs a water pump as i snapped a bolt in pulley will break if enough interest as head just had its first skim, just looking into prices of engines complete like this and in bits
4wd inlet manifold both parts, powder coated satin black £80
4wd throttle body complete £40
2wd bailey header tank powder coated satin black £80
bailey mirror image breather tank with -10 quip fittings in satin black £ £60
on hold fezzjsy
water swirl pot in satin black £40
pro alloy rs500 intercooler, been modded to fit escos some sort of sealent £150
std rad £40
escos rad fans, need connector £50
4wd rear beam and arms only, powdercoated blue and silver, includes all bolts, new poly bushes bar roll bar, also adjustable drop links, arms have been modded for strength where shock mounts, drop links alone are £120, im asking £180 for the lot
rear hubs with new wheel bearings fitted £100
4wd rear diff, cleaned and painted, needs oil £100
alloy diff mount with conversion bolts £80 on hold iain
4wd rear driveshafts new joints and gaitors £100
fuel tank powdercoated silver £40 complete with sender
fuel pump cradle, powder coated silver needs bobbins to put together £50
4wd mt75 gearbox, modded for hydraulic clutch missing clutch arm, includes gearstick and alloy cradle bushes, missing front prop £300
gearbox mount powdercoated black £20
gearbox mount £10
vibratechnic engine mounts £60
4wd engine cradle powder coated silver £40
4wd engine mount arms powdercoated silver £10
4wd front hubs with new bearings £150
xr4x4 front shafts, need new gaitors £60
rear beam disc back plates powder coated black £20
2wd full p/s pipes no leaks £30 on hold
p/s pump £20
philloy twin bar strut brace with custom coil pack bracket £80 on hold kitchen devil
complete set of poly bushes for front £30
metal fuel lines underneath painted silver £20 includes new clips
4wd gaz gold coilovers done 2k £600
4wd steering rack, new gaitors and alloy bushes £50
4wd front diff 360
uprated braided fuel pump loom £30
uprated braided fan loom £30
full interior plastics for a xr4x4 that have been flocked by raj at autoflock motorsport, only thing that wasnt done was the centre console as i sent the wrong one, but this can be done for £50 he said so will supply the console, all this will fit a saf aswell, only the parcel shelf holders wont fit
will include door cards which have carbon inserts i made, not brilliant but this car was my first attempt at carbon work £300 only parts that arnt available are the roof parts and no interior handles or a pillars, door cards have had speaker pods screwedinto them so will have some small holes in them, unless you want the speaker pods with interior which ill chuck in
rouse style winged seats and back seats, little bit of wear back seats has a small slit in it, these are as close your gona get to genuie rouse seats,a lso have carbon side panels £300
ALL CARBON WORK WAS MY 1ST ATTEMPT SO IS NOT PERFECT AND DOES HAVE DEFECTS, LIKE SOME HOLES OR ORIGINAL PART SHOWING THROUGH IF YOU LOOK CLOSE
carbon outer door handles, do show some plastic where the weave had been rubbed through or seprated but only if you look close £40
outer door triangles, carbon has lifted in some places £20 on hold rslubby
inner door triangles 3 of no mirror control one £30
ecu cover carbon covered not brilliant £20
fog light surrounds in carbon covered not bad £20 hold rslubby
interior door handle trim pieces in carbon ok condition some mistakes £20
black roof lining for hatchback, includes flocked handles and sunroof handle panel, aswell as sun visors, also includes sunroof which has a black insert £80
twin pod gauge holder flocked in black, will supply other side a pillar to match the flock £50
complete boot install for hatchback, includes 2x 12 inch subs, 3 amps and all wiring and 6x9s £300
hatchback smoked rear lights £20
hatchback number plate panel £10
cosworth front bumper, with fogs and towing eye, has had aerao catches built in for quick release and mounting, will supply brackets that bolt to wings to mount bumper £150
rouse sport front splitter in satin black, slight scuff £80
rouse sport sideskirts £250 slight crack in one very hard to find
hatchback rear bumper with rs valance £50
carbon covered mirror covers £40
under headlight strip no wiper cutouts for twin head lights £10
rear prop good bearing £20
4wd prop doughnut £50
4wd vented bonnet £60
grill £10
bailey p/s tank in satin black £60 hold rs lubby
compomotive old style mos et33, with almost new 215/35/18 tyres these will be the last thing to sell as im using them still lol, but i have someone with first refusal, they will be fully refurbbed and balanced before sale aswell £1000
map sensor bracket in black £15
strut topmounts in black £10
i will also have a few other parts but need to go round my friends to see what i have there lol
also have all switches, looms, glass, locks etcm adjustable steering coloms, brake servos, i dont have any boost hoses or water hoses sorry, when i get more parts i will list them, anything not on the list please contact me and ill see if i have it or not
#26
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Received 1,044 Likes
on
998 Posts
How much would you charged to post the engine mounts to me in the north east of england. Pm if you want fella cause im interested. I might of missed it but did it have 4x4 rear calipers on the car. Would you sell a caliper carrier seperate from the califsste.
#34
PassionFord Post Whore!!
Hello mate, pm sent re seats (reply to you from before)
#38
Too many posts.. I need a life!!