B13 JUS

iTrader: (24)

GT3071 for sale.

Same spec as cossie rich's that made 453 on a set of DD rollers recently on a standard YB head with a BD14 inlet

Comes complete with:
Surge ported inlet housing
V band adaptor outlet
V band itself
The V band portion you need to weld onto your existing downpipe (3" needed)
Actuator (needs bracket sorting for how you orientate it, so you will need to do that)


£900 with fittings

i bought this from chip about 6 months ago but never used it. so its still brand new.

These are 1430 dollars in the states for a bare turbo currently from ATP
http://www.atpturbo.com/Merchant2/me...egory_Code=BCS

Thats without the surge ported front housing, without the actuator and without the v aband adaptor outlet or fittings, that lot pushes it up to well over 1600 dollars, and then you have to get it here!


Brand new, genuine garrett





[IMG]file:///C:/Users/ACER_O%7E1/AppData/Local/Temp/moz-screenshot.jpg[/IMG]

boXXer

VERY VERY tempted........

Whats the "v" band bit all about then? i hear it mentioned quite often

B13 JUS

iTrader: (24)

you need to cut about 15mm of the end of your exhaust (where it joins the turbo) and weld the v band adaptor so you use a v band to fasten the exhaust to turbo. not the 3 bolts
but when i've been looking it might fasten up without cutting the exhaust as the exhaust is a simlar shape to the v band anyway. (i may be wrong)

boXXer

ah i get it now. Basically you have to change th flange on the exhaust pipe to fit the GT series. Do they not do 3bolt housings?

B13 JUS

iTrader: (24)

yeah thats right.
i've seen a 4 bolt housing but not a 3. i'm sure someone must sell one so you don't need to change the flange.

- Sim -

,82 housing, when will it start to produce boost then?

if there is headwork, can it be earlier?

B13 JUS

iTrader: (24)

i've been told they start to produce boost like a t34

- Sim -

hmm
a T34 has a much smaller exhaust side, 0,63 or even smaller...

RWD_cossie_wil

iTrader: (9)

The size cannot be compared across turbos, it is the aspect ratio between the turbine wheel and the turbine housing.

CossieRich

iTrader: (1)

SIM,

over 2 bar at 4k on mine

B13 JUS

iTrader: (24)

SOLD

boXXer

boo hoo, lol

CossieRich

iTrader: (1)

not surprised it sold. Great turbo

Chip

iTrader: (3)

Not surprised it sold so quick at that price, they are about 100 quid more than that from me now thanks to the weak pound sadly!

boXXer

next time

CossieRich

iTrader: (1)

Its actually a 480bhp turbo all factors being correct on the engine its going on