Ford RS Cosworth Parts for Sale Only RS Cosworth parts here please. Only Gold Members can sell parts!

2wd saff breaking.ap/billys/mo's/200 block/reground crank etc

Thread Tools
 
Search this Thread
 
Old 08-10-2008 | 09:45 AM
  #1  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default 2wd saff breaking.ap/billys/mo's/200 block/reground crank etc

right the deal has been done on my new car so these parts are officially up for sale. ignore my previous post and at the moment only really what i list is for sale. ideally i need the shell left in some sort of decent state with a view to getting my private plate off in the future i would sell the shell if a compromise is reached about the plate. its in pretty good nick

Here is shell underside resto





anyway here are the parts and i'll listen to offers on each if need be,

pic of underbonnet stuff



Compomotive MO's in black, 17". et to be confirmed tonight but they are 2wd fitment. rears are 235s but have melt spots from the rollers. pics of that to follow but rubber depth is good. fronts i think are 215s but will confirm tonight. £500

T34 Turbo with 0.48 housing. Done barely 3-4k tops. £400 - SOLD to Oliver


Shotpeened T5 gearbox. Was excellent condition when i used it and done barely any miles with me. I've driven with bad synchros and this is a dream in comparison! £350 SOLD to STUCOS

Short shift for 2wd box, nice tight gearchange, £60 - SOLD to righthooker

crank thats been recently reground to 0.25 at SCS, inc bearings. £450

Crank, think standard but needs ground £200 ono


FULL gpA engine gasket set, new. £180

2 sets standard rods, £100/set

GpA 044 pump done about 500 miles tops. £100 SOLD spoilt_rs

Green injectors. Professionally checked and cleaned by boschman and done barely 500-1000 miles since. £120 - SOLD spoilt_rs

3 bar map sensor £30 SOLD to Oliver

bailey header tank, £70 SOLD to Oliver

bailey swirl pot, £40 SOLD to Oliver

magnex exhaust with centre boxes removed and sounds excellent. fits FAR better and higher than other systems as it splits in 2 like OE. £200 ono

Radtec 500 IC, BRAND NEW, only fitted but never run. £280 SOLD to Oliver

AP CP5000 2wd kit. calipers, hoses, brackets, bells, discs. 1 caliper had a repair where bleed nipple cracked the case. professionally fixed by Philloy. discs seen better days. £450 SOLD to loader





AP CP5200 calipers, VGC, with 4x4 brackets. £350





Rear AP calipers, dont know model, 1 caliper has 1 stuck bleed screw. recently rubbed down but needs paint. £200 - PROVISONALLY SOLD Ronnie Amis

Twin AP brake bias valves £60

Hydraulic handbrake, unsure on price, £100? - PROVISONALLY SOLD Ronnie Amis

Loom, new 3yrs ago, done FA miles in car. supplied by Dingy. £300 ono

Cam cover, blue with breather take off, £70 - SOLD to trotter

Bailey breather, dont know what its worth. offers. - SOLD to trotter

Full set of water/boost hoses in blue. GGR make i think. £80 SOLD to righthooker

GpA coil £20 - SOLD to trotter

Ford motorsport Beru leads, hard to find, £50 SOLD to Oliver

Ford OUTER trailing arm bushes, BRAND NEW, rocking horse shit and deleted from ford, £150.

-31 actuator £30 SOLD to Oliver

Standard airbox with K+N filter panel £40

Smoked saff rear lights £25

Rear number plate surround from 4x4, £20

Rear abs sensors, pair of, £50

Tarcal Strut brace £100?! dont know value.

200 block, 99, original bore, melt down so needs hone/bore. £tbc
200 block cracked across head bolt, .5 bore £offers

Head fully rebuilt, brand new tappets, ground valves etc. would need to check depth. £500

2wd head, needs skim, quite low already. complete set of good valves. offers.

2wd inlet £40

2wd exhaust manifold £50

2wd flywheel £40

2wd cams £60

Mocal remote oil filter
Mocal in line oil thermostat
Mocal 19 row oil cooler with full braided lines and dash fittings. £250 the lot SOLD to STUCOS

Fully rose jointed front Bilstein coilovers. offers

Fully rose jointed rear Bilstein coilovers, 1 is leaking slightly. offers

2wd GAZ coilover kit £350 ono

Racetech oil temp/oil pressure gauge
Racetech water temp/pressure gauge
Racetech fuel pressure gauge,
Racetech boost gauge
Air/Fuel ratio gauge


GENUINE RS 500 splitter cut to fit a saff. £200.

I will accept offers accordingly.

Number is
email chopsworth@hotmail.com

would prefer cash paid direct to halifax/Bank of Scotland or cash recorded delivery. Not interested in paypal really.

Postage on top obviously.

Last edited by Lambchop; 31-08-2011 at 05:50 PM.
Old 08-10-2008 | 10:50 AM
  #2  
cossie4i+'s Avatar
cossie4i+
TT T38 Power
iTrader: (15)
 
Joined: Apr 2005
Posts: 22,368
Likes: 32
From: Somerset
Default

What about the diff ?

Steve.
Old 08-10-2008 | 10:53 AM
  #3  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by cossie4i
What about the diff ?

Steve.

STUCOS is first on that and wants it. I could sell the bloody thing 20 times with all the pms!!
Old 08-10-2008 | 01:18 PM
  #4  
BigErn's Avatar
BigErn
PassionFord Post Whore!!
 
Joined: Nov 2006
Posts: 7,445
Likes: 3
From: Sunderland
Default

Just text ya mate
Old 08-10-2008 | 01:23 PM
  #5  
STUCOS's Avatar
STUCOS
PassionFord Post Whore!!
iTrader: (8)
 
Joined: May 2003
Posts: 5,061
Likes: 0
From: side way some were in tayside
Default

Diff's mine ,whish i had more money chop,as there's other bits i would like

cheeRS stu
Old 08-10-2008 | 01:24 PM
  #6  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by STUCOS
Diff's mine ,whish i had more money chop,as there's other bits i would like

cheeRS stu

like what? would hold for you (maybe!)

or trade me for that flipping lid!!!!


ern
replied
Old 08-10-2008 | 01:26 PM
  #7  
STUCOS's Avatar
STUCOS
PassionFord Post Whore!!
iTrader: (8)
 
Joined: May 2003
Posts: 5,061
Likes: 0
From: side way some were in tayside
Default

Chop gives a phone when you have a minuite

cheeRS stu
Old 08-10-2008 | 01:43 PM
  #8  
rog's Avatar
rog
PassionFord Post Whore!!
iTrader: (2)
 
Joined: Jul 2003
Posts: 8,275
Likes: 69
From: Aberdeen
Default

What size discs were the 4x4 front calipers/brackets setup for???
Old 08-10-2008 | 02:03 PM
  #9  
rstoughy's Avatar
rstoughy
PassionFord Post Whore!!
iTrader: (5)
 
Joined: May 2004
Posts: 4,320
Likes: 0
From: onshore at the moment
Default

Hmmm i need an engine loom for the 3 door
Old 08-10-2008 | 02:48 PM
  #10  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by rstoughy
Hmmm i need an engine loom for the 3 door

speak to me tonight im due you favours really anyway!!!
Old 08-10-2008 | 06:04 PM
  #11  
westus1's Avatar
westus1
Advanced PassionFord User
iTrader: (6)
 
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
Default

much for the 2wd head that needs skimmed?
Old 09-10-2008 | 09:22 AM
  #12  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by westus1
much for the 2wd head that needs skimmed?

£100?! fuck knows! its quite low on depth. can deliver fri night
Old 09-10-2008 | 09:34 AM
  #13  
AlexD's Avatar
AlexD
Post Miester !
iTrader: (3)
 
Joined: May 2003
Posts: 4,645
Likes: 0
From: Brizzol! oo'er!
Default

Just make sure before you start breaking the car the dvla dont need to inspect the
car before you can take the plate off.

I think they do it now on all cars over 15yrs old.

Its a stupid system but it needs a current mot and the car cannot be untaxed for over 12 months.

Just thought i would mention it, as i almost got caught out on my saph..

Al...
Old 09-10-2008 | 09:46 AM
  #14  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by AlexD
Just make sure before you start breaking the car the dvla dont need to inspect the
car before you can take the plate off.

I think they do it now on all cars over 15yrs old.

Its a stupid system but it needs a current mot and the car cannot be untaxed for over 12 months.

Just thought i would mention it, as i almost got caught out on my saph..

Al...
i know the scoop and its a twat. i have ways and means.
Old 09-10-2008 | 09:41 PM
  #15  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

anyone want anything brought south tomorrow?!

all pms replied to.
Old 09-10-2008 | 11:51 PM
  #16  
BigErn's Avatar
BigErn
PassionFord Post Whore!!
 
Joined: Nov 2006
Posts: 7,445
Likes: 3
From: Sunderland
Default

Still waiting for pics of the guages mate or even a link to see what they are like
Old 12-10-2008 | 06:45 PM
  #17  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

pics added but excuse the crap quality and the ridiculous size
Old 12-10-2008 | 08:19 PM
  #18  
sortedsaff's Avatar
sortedsaff
Advanced PassionFord User
 
Joined: Nov 2006
Posts: 1,999
Likes: 0
From: gt yarmouth/stevenage
Default

interested in the 2wd head that needs a skim. any pics and do you know how much meat is left on it?

best price inc post?

CheeRS
Tony
Old 12-10-2008 | 10:11 PM
  #19  
STUCOS's Avatar
STUCOS
PassionFord Post Whore!!
iTrader: (8)
 
Joined: May 2003
Posts: 5,061
Likes: 0
From: side way some were in tayside
Default

Oil cooler etc,2wd head shield,braided water pipe,dont sell will be in touch shortly

cheeRS stu
Old 13-10-2008 | 09:44 AM
  #20  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by STUCOS
Oil cooler etc,2wd head shield,braided water pipe,dont sell will be in touch shortly

cheeRS stu

no sweat bud. amazingly i did remember! which pipe again? i forgot that

thanks for all your help on fri night, oh and your custom. please shop again soon
Old 13-10-2008 | 03:42 PM
  #21  
bigjim172000's Avatar
bigjim172000
Me Cossie Runs Atlast!!!!
iTrader: (1)
 
Joined: Apr 2004
Posts: 1,297
Likes: 0
From: Attleborough, Norfolk,
Default

Gearbox mount?
Old 13-10-2008 | 04:04 PM
  #22  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by bigjim172000
Gearbox mount?

if you show me a pic or someone can point at it in my pile of parts then no problemo!
Old 13-10-2008 | 04:23 PM
  #23  
bigjim172000's Avatar
bigjim172000
Me Cossie Runs Atlast!!!!
iTrader: (1)
 
Joined: Apr 2004
Posts: 1,297
Likes: 0
From: Attleborough, Norfolk,
Default

http://cgi.ebay.co.uk/VIBRA-TECHNICS...d=p3286.c0.m14

Uprated ones on ebay
Old 13-10-2008 | 04:24 PM
  #24  
rog's Avatar
rog
PassionFord Post Whore!!
iTrader: (2)
 
Joined: Jul 2003
Posts: 8,275
Likes: 69
From: Aberdeen
Default

Fits the script for the night then? My cosworth fingers are itching......It's either underseal the car or get bits from your car, so make my mind up for me!
Old 16-10-2008 | 01:15 PM
  #25  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

all pms replied to
Old 16-10-2008 | 01:42 PM
  #26  
sortedsaff's Avatar
sortedsaff
Advanced PassionFord User
 
Joined: Nov 2006
Posts: 1,999
Likes: 0
From: gt yarmouth/stevenage
Default

how much meat is on the 2wd head that needs a skim pal ? also how much ?

CheeRS
Tony
Old 16-10-2008 | 02:21 PM
  #27  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by sortedscort
how much meat is on the 2wd head that needs a skim pal ? also how much ?

CheeRS
Tony
sorry i forgot when you asked last

i'll dig it out and see if i can find some calipers to measure the depth
Old 16-10-2008 | 02:59 PM
  #28  
sortedsaff's Avatar
sortedsaff
Advanced PassionFord User
 
Joined: Nov 2006
Posts: 1,999
Likes: 0
From: gt yarmouth/stevenage
Default

Originally Posted by Lambchop
sorry i forgot when you asked last

i'll dig it out and see if i can find some calipers to measure the depth

no worries pal thought id remind you lol. that would be wicked cheers
Old 16-10-2008 | 08:24 PM
  #29  
rocky_robin's Avatar
rocky_robin
Too many posts.. I need a life!!
 
Joined: Jul 2005
Posts: 509
Likes: 0
From: Aberdeen
Default

Hold that turbo!!!

Just been on the phone to Oliver (in africa anoo) and he wants it!!!
Old 17-10-2008 | 09:37 AM
  #30  
rog's Avatar
rog
PassionFord Post Whore!!
iTrader: (2)
 
Joined: Jul 2003
Posts: 8,275
Likes: 69
From: Aberdeen
Default

Oliver of richard hammond and topgear fame???

Old 17-10-2008 | 08:10 PM
  #31  
bigjim172000's Avatar
bigjim172000
Me Cossie Runs Atlast!!!!
iTrader: (1)
 
Joined: Apr 2004
Posts: 1,297
Likes: 0
From: Attleborough, Norfolk,
Default

Any idea about the gearbox mount chap?
Old 17-10-2008 | 10:48 PM
  #32  
Lambchop's Avatar
Lambchop
Thread Starter
PF Idiot Sniper
iTrader: (1)
 
Joined: Jun 2003
Posts: 25,903
Likes: 7
From: Australia
Default

Originally Posted by bigjim172000
Any idea about the gearbox mount chap?

think its attached to box. i'll take pic and show you
Old 19-10-2008 | 07:26 PM
  #33  
rocky_robin's Avatar
rocky_robin
Too many posts.. I need a life!!
 
Joined: Jul 2005
Posts: 509
Likes: 0
From: Aberdeen
Default

Originally Posted by rog
Oliver of richard hammond and topgear fame???


I actually chuckled at that!

Oliver is the man who stays not far from you (told you about him b4)
Old 19-10-2008 | 07:56 PM
  #34  
Barry R's Avatar
Barry R
PassionFord Post Troll
iTrader: (3)
 
Joined: May 2007
Posts: 3,334
Likes: 1
From: Bristol
Default

Right i need the following please:-
1x rubber engine mount
metal water pipe at bottom of rad
fan switch plug with about 2" of wire left on
rad mounts
circlip that holds the speedo cable to gearbox
both front kick plates

CheeRS Barry
Old 20-10-2008 | 10:55 AM
  #35  
STUCOS's Avatar
STUCOS
PassionFord Post Whore!!
iTrader: (8)
 
Joined: May 2003
Posts: 5,061
Likes: 0
From: side way some were in tayside
Default

Gearbox as per phone call

cheeRS stu
Old 20-10-2008 | 09:04 PM
  #36  
Sheepy's Avatar
Sheepy
15000
 
Joined: May 2004
Posts: 33
Likes: 0
From: Nr Edinburgh
Default Loom

Is the loom still sold or is it available again ?
Old 20-10-2008 | 09:38 PM
  #37  
RONNIE AMIS's Avatar
RONNIE AMIS
PassionFord Post Whore!!
iTrader: (17)
 
Joined: May 2004
Posts: 5,618
Likes: 0
Default

did you get my text the other day mate?
Old 30-10-2008 | 10:30 AM
  #38  
jb fletch's Avatar
jb fletch
MAD Carbon Cossie
iTrader: (1)
 
Joined: May 2004
Posts: 2,899
Likes: 0
From: South London
Default

PM Chop !!
Old 30-10-2008 | 10:52 AM
  #39  
sortedsaff's Avatar
sortedsaff
Advanced PassionFord User
 
Joined: Nov 2006
Posts: 1,999
Likes: 0
From: gt yarmouth/stevenage
Default

pm'd buddy
Old 06-11-2008 | 10:11 AM
  #40  
Sheepy's Avatar
Sheepy
15000
 
Joined: May 2004
Posts: 33
Likes: 0
From: Nr Edinburgh
Default

Are the wheels and gearbox still available ?
ta, iain.


Quick Reply: 2wd saff breaking.ap/billys/mo's/200 block/reground crank etc



All times are GMT. The time now is 07:19 PM.