Engine warning light on
#1
Virgin
Thread Starter
Join Date: Jun 2012
Location: nottinghamshire
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Engine warning light on
Hi,
I replaced the Intercooler to Egr valve pipe yesterday as the old pipe had split. On starting the engine after finishing, I noticed the engine warning light did not go out. I have checked the electrical plug on Egr valve and the one on plastic pipe at bottom ( the pipe which is fastened to sub frame and has a rubber pipe to the Intercooler on other end ) of radiator, I found I had forgot to reconnect the vacuum pipe on the Egr. After I reconnected it the light is still on, engine runs perfectly, plenty of power, no unusual noises. Does the light have to be reset via code reader/computer?
Thanks for any help or suggestions.
Badman.
ps. The car is a mk3 2.0L TDCI 96kw mondeo titanium estate with the electrical Egr valve.
I replaced the Intercooler to Egr valve pipe yesterday as the old pipe had split. On starting the engine after finishing, I noticed the engine warning light did not go out. I have checked the electrical plug on Egr valve and the one on plastic pipe at bottom ( the pipe which is fastened to sub frame and has a rubber pipe to the Intercooler on other end ) of radiator, I found I had forgot to reconnect the vacuum pipe on the Egr. After I reconnected it the light is still on, engine runs perfectly, plenty of power, no unusual noises. Does the light have to be reset via code reader/computer?
Thanks for any help or suggestions.
Badman.
ps. The car is a mk3 2.0L TDCI 96kw mondeo titanium estate with the electrical Egr valve.
Thread
Thread Starter
Forum
Replies
Last Post
Stu @ M Developments
General Car Related Discussion.
41
21-08-2015 06:47 AM