Cossy Man (crank sensors)
16-01-2006, 09:43 AM
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2005
Location: Herts(under a s2 with a centrino laptop)
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Cossy Man (crank sensors)
When you convert an rst over to cossy man do you have two crank sensors?
Ive seen cars with them on the crank and on the cam pulley? The cossy wiring loom only has one crank sensor.
Im a bit confessed any help would be good.
Also where do I get the plate to mount the sensor and pick up plate?
Ive tried jano @ old kids but I cannot get hold of him...
Jim
Ive seen cars with them on the crank and on the cam pulley? The cossy wiring loom only has one crank sensor.
Im a bit confessed any help would be good.
Also where do I get the plate to mount the sensor and pick up plate?
Ive tried jano @ old kids but I cannot get hold of him...
Jim
someone must be running cosworth man
16-01-2006, 05:59 PM
#4
10K+ Poster!!
Join Date: May 2005
Location: Cheltenham, Gloucestershire
Posts: 13,798
Likes: 0
Received 0 Likes
on
0 Posts
Hello mate
i havent got cossie management, but it has a crank and cam position sensor, hence the 2 sensors.
More advanced management use more sensors and achieve better mapping etc
i havent got cossie management, but it has a crank and cam position sensor, hence the 2 sensors.
More advanced management use more sensors and achieve better mapping etc
Thread
Thread Starter
Forum
Replies
Last Post
DixieTheKid
Ford Sierra/Sapphire/RS500 Cosworth
11
06-06-2020 11:20 AM
timsrs
Ford Sierra/Sapphire/RS500 Cosworth
22
24-09-2015 08:14 PM
Si B
General Car Related Discussion.
2
12-09-2015 06:49 AM
