TIL13R

Hello all...

My recent purchase a Tubular Manifold, after a recent test fit on my spare engine it has come to light that it is going to fowl the crossover pipe. Im using EFI inlet manifold

here are a few pics....







Any idea how i could get round this problem...??

Cheers

Tiller

Sonic Boom

iTrader: (11)

Fabricate a new cross over pipe using alloy tube.
Rich

paul-h

What kinda space you going to have with rad, intercooler & fans on the front end?

TIL13R

Pro alloy front mount and rad.... Its a Fiesta BTW...

paul-h

Ah I see! Was looking at that going that looks like it would be tight in an escort ha!

crazycage

nice manifold , was that raj's old one?

TIL13R

Hello mate,

From what info I been told it is one of your creations.. I brought it of a mate in hemel Hempstead was going on a 2.1zvh but car been broken now.

Cheers

Tiller

kittyr002

Fabricate a new cross over pipe using alloy tube.

Dennis_Wiseman

iTrader: (1)

Run the carrier pipe off to the left. Either cut the Ford carrier to reverse it or use silicone bends and tubing depending on clearance

cozzierep

im sure ive got an inlet pipe that comes bk on itself, it was taken off my ka turbo cus was a tight fit.. lol, il have a look in shed if still got it,

Dennis_Wiseman

iTrader: (1)

Zetec lump but same idea





Slightly different:

cozzierep

the last pic is what ive got, thats how had to pipe it up on the ka,

TIL13R

Thats perfect.... Just what i was looking for....

Do you have one of these for sale...??

cozzierep

if can find it then yeah mate, il let u know a.s.a.p

Hobomassiv

Thats a 'blakey' inlet pipe i think, very few made.

Im running the efi inlet and engine in my ka but it has an ovaled pipe on the rocker cover (L-R) going 90 deg into the TB.

If you got an alloy 120deg bend you could maybe have an engineering place heat it and flatten it a bit?

botters

iTrader: (2)

use an xr3i inlet manifold they have throttle on the right hand side of the manifold and look nice with the ford logo on them plus i have one for sale lol

Hobomassiv

Ive jsut replied to you on another 'ka based' forum:



This is what i have, the pipe is oval shaped to clear the bonnet.

Rick

Get an inlet from the guy who made the exhaust