stevenebm

iTrader: (6)

guys im repiping the whole car (s1).can anybody tell me what pipe goes where.a diagram would be spot on.theres four outlets in the master cylinder.two cylinder type things at drivers side with two pipes coming out it that ive cut.i cant remember what goes where.oh and what size are the fittings on the master cylinder so i can order some up. 3/8th 10mm??

jodyhoare

here is a diagram of the braking system mate, hope it helps

stevenebm

iTrader: (6)

mate if you could get that in a series one that would be spot on.that looks like s2 with the abs etc.different from mines.that diagram would be spot on tho in s1 form

StephenC

steve, if no one replies today Ive got the s1 ford workshop manual in the van and I'll scan the appropiate pics later

stevenebm

iTrader: (6)

cheers steven.that would be great if no one else can help.

RsDarren

iTrader: (1)

Steve,

I'm pretty sure that the S1 loops out the ABS with a small piece of pipe between the 2 holes. I'll have a look through my pictures tonight and post one up.

Darren

stevenebm

iTrader: (6)

cheers guys.any help is appreciated as i totally forget which way the original pipes go.

StephenC

well, Ive looked but cant seem to find anything specific to the series 1?? This is from the Ford manual



^ I think this is just poverty spec cars though and not series 1

this from haynes


found this off of here


this is my master cylinder, the rear port is m10x1 and the front m12x1 (old pic), but not sure what yours will be


Theres nothing on ford microcat

Ive checked both manuals from here (both series 1 workshop manual and series 2, neither book even mentions brakes) http://www.siipicossu.com/manuaaleja/manuaalit.htm and again nothing, so all in all, not much help, sorry bud. Hopefully someone with a series 1 will come on later

stevenebm

iTrader: (6)

steve the top pic of the car sorta makes sense mate