efi conversion problem
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Oct 2005
Location: germany near munich
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi i have a problen. after the efi conversion the engine starts normal runs 5 seconds and slowly stops. when is start with bit of more throtle the engine runs on higher idle but only for 5 seconds too.
any idea whast the problem?
thanx for help
any idea whast the problem?
thanx for help
Last edited by RS-Turbo; 24-02-2009 at 02:50 PM.
#3
Too many posts.. I need a life!!
Join Date: May 2003
Location: oldham / manchester
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
fuel pump relay wired in? it sounds likes it running of the prime then no signal to kick the pump in! listen under the car whilst it runs see if pump is buzzing?
#6
Too many posts.. I need a life!!
Join Date: May 2003
Location: oldham / manchester
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ignition primes the pump for hgalf a second or so, once the car fires the pump should run constantly, mine did this when i first did my EFI until i ran the wire into the relay. Same as yours ran a few seconds then died
Trending Topics
#9
Too many posts.. I need a life!!
Join Date: May 2003
Location: oldham / manchester
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post