Gregor

Can someone tell me how high the current should be that comes off the crankshaft position sensor.

thanks

Rick

It isn't a current, it's an AC voltage. It increases with amplitude and frequency with engine speed. At cranking speeds, you should have around 3V minimum, it will rise to 100+ with speed. With engine stopped, it will be zero.

Gregor

Yea sorry my bad.
It's no current... was thinking voltage...( i'm not Englisch )

But anyway, so at cranking i should see 3v if i messure it at the sensor when its not connected to the ecu...
Will see what i get tomorrow..

Thanks

DazC

iTrader: (1)

From memory, I usually see 2.5v at cranking across the 2 terminals (ECU disconnected).

Gregor

Thanks mate, i'll have a look at it