what sort of power will a t34 with .63 housing produce on a zetec turbo with 8-2-1 comp and grey injectors,cossie managment......l8,turbo spec cams steel rods and forge piston thanks

 

you should see 400 mate

 

sound ill be happy with that

 

320 is more realistic IF the head is correctly ported.

 

How would a T34 or even a T38 work on a full CVH?

Would it be mega laggy?

 

if you read the post,it says zetec turbo

 

what sort of boost would i have to run for that figure karl...cheers

 

Around 22 - 25psi depending on engine spec.

 

thanks karl

 

I did read the post mate but was still asking how a T34 or T38 would work on CVH

 

I will be running a t34 .63 on my zetec turbo. It will be 300+ bhp if you run over 20 psi as karl says.

 

well im running a t34.48 and should get around 350bhp on 20psi

 

sorry pal, it will be very laggy i suspect

 

its hard enough to get a cossie lump to do that which is a more efficient lump in the first place the exh housing imo wont allow what you think u will get .
tim

 

Cheers mate kind of thought that but thought i'd ask.

Anyone actually running either on a CVH or has run?

 

well we will have to wait and see then ,my comp ratio is a hell of alot higher that a cossie tho.

 

carnt you get 350 bhp from a cossie with a 48 housing?,i thought you could

 

Yeah im running a T34 on a CVH, all you get is lag lag lag lag then bang loads of power Im getting it swapped out for something smaller.

 

hope it works out for ya

as for the lag on the bigger turbos if the rest of the build isnt right for a bigger turbo is there any wonder it feels laggy ?
I have a to4b and it has 1.3 bar at 3000 and 33 psi before 4300 so there not laggy if there specced right.

 

Cheers guys,all info is mucho appreciated!