FRS Brembo's on a RS Turbo
23-02-2008, 03:51 PM
#121
PassionFord Post Whore!!
17" kit using the RS 7 spoke with the huge caliper now almost ready.
Enquirys / orders being taken
315mm x 28mm rotors with the massive Brembo caliper giving a 65mm pad surface area, bigger than the AP or RS options at a fraction of the cost.
Another feature of these calipers is the butterfly pad retaining clip.
Squeeze together in the middle and you can change your pads in under 30 seconds.
Enquirys / orders being taken
315mm x 28mm rotors with the massive Brembo caliper giving a 65mm pad surface area, bigger than the AP or RS options at a fraction of the cost.
Another feature of these calipers is the butterfly pad retaining clip.
Squeeze together in the middle and you can change your pads in under 30 seconds.
23-02-2008, 06:25 PM
#123
PassionFord Regular
Thread Starter
Join Date: May 2006
Location: Wales
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Thats 5 peeps that want them now, 10 was needed for the order but getting closer mate. Will pm Thorpey to see if has anymore names 7 if we are any closer to getting them done
23-02-2008, 11:03 PM
#125
Brand new 2 piece bells / rotors, brand new Porsche Brembo calipers, all fitting kits & alloy brackets £700. Pad spec is the only addition on price then.
Rich, brackets are away at the anodisers just now so will take some pictures next week
Rich, brackets are away at the anodisers just now so will take some pictures next week
06-03-2008, 09:58 PM
#131
PassionFord Regular
Thread Starter
Join Date: May 2006
Location: Wales
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Have 8 names now, 2 to go 
1. series1rscars
2. turbodan300 (www.seriesoneturbo.co.uk user)
3. mercurygreyrsturbo (PF User)
4. ossie cossie (PF user)
5. oriont (PF user)
6. Banner the Hammer (www.seriesoneturbo.co.uk user)
7. Ossie Cossie (PF user) defo maybe
8. Andyrob (PF user) for his mate
9.
10.
1. series1rscars
2. turbodan300 (www.seriesoneturbo.co.uk user)
3. mercurygreyrsturbo (PF User)
4. ossie cossie (PF user)
5. oriont (PF user)
6. Banner the Hammer (www.seriesoneturbo.co.uk user)
7. Ossie Cossie (PF user) defo maybe
8. Andyrob (PF user) for his mate
9.
10.
Last edited by series1rscars; 07-03-2008 at 10:51 PM.
07-03-2008, 04:47 PM
#132
I've found that life I needed.. It's HERE!!
17" kit using the RS 7 spoke with the huge caliper now almost ready.
Enquirys / orders being taken
315mm x 28mm rotors with the massive Brembo caliper giving a 65mm pad surface area, bigger than the AP or RS options at a fraction of the cost.
Another feature of these calipers is the butterfly pad retaining clip.
Squeeze together in the middle and you can change your pads in under 30 seconds.
Enquirys / orders being taken
315mm x 28mm rotors with the massive Brembo caliper giving a 65mm pad surface area, bigger than the AP or RS options at a fraction of the cost.
Another feature of these calipers is the butterfly pad retaining clip.
Squeeze together in the middle and you can change your pads in under 30 seconds.
Hi mate
I spoke to you a couple of weeks ago regarding this set up with the carbon calliper ??
Just wonder if this is available to order
Regards kop
07-03-2008, 11:41 PM
#133
The carbon look caliper is currently in production at Brembo, we have over 40 sets ordered and so far nearly half have been reserved against jobs already. If you were thinking of it being the one for you I'd get your name on my list sharpish 
Thread
Thread Starter
Forum
Replies
Last Post
big, brembo, brembos, clear, compomotive, compomotives, conversion, cosworth, disks, escort, passionford, rs, sti, turbo, wheels
