Moonie

Just rebuilt my S2 Turbo engine and run it in, now it's time i got it properly set up. Where do you recomend in the North West area?

bigmatt-s2rst

motorsport developments seem to be the only place round here mate and ive heard good things, thats were im gunna take mine when its rebuilt, were you from? my best mates called moonie and hes got a fiesta rst

Moonie

will give motorsport developments a bell and see what they can do, cheers

I'm from the Bury/Noth Manchester area.

matt500

i would try karl norris at norris motorsport he live maps the lot!


http://www.norrismotorsport.co.uk/

matt

DazC

iTrader: (1)

Live mapping will not help an RST owner mate!! Plus Karl is in the midlands, not the North West.

Karl and MSD are both very good. If you decide to use either, you will get a good service. If you don't fancy traveling to Coventry to see Karl then Blackpool to see Stu and Kenny at MSD is your best option.

My Series 1 was set up by MSD.

matt500

dazc: only trying to help!!

karl mapped my series 1 and my cossie plus a couple of my mates ersts and we had no probs!

matt

maxi

Im new to all this Ford malarkey, DazC can you tell me why Live mapping will not help an RST owner? I have absolutely no clue about the RST management......

Maxi

DazC

iTrader: (1)

Hi mate. The ESC2 ECU and the Bosch fuel ECU as used on the S1 and S2 are not mappable. In other words, you cannot plug an emulator and laptop into the system and alter settings. Not only that, the fuel system is mechanical and has very little electronic control over fueling. The fueling has to be set up manually. The only thing you can do with the ignition ECU is change boost limits and ignition curves but that has to be done on the bench with the ECU and chip out of the car. You can do little more than set up the KE Jetronic.

Matt,

The Cossie is a fully mappable system. The only way Karl can map your S1 would be if it had not got standard management on it or EEC4 (Karl won't touch EEC cos he doesn't like it and sends all people who enquire about EEC to Stu at MSD). Sorry if it seemed like I was having a go. It wasn't intended like that.