Has anyone done this to their S2 to run group A wheels.

Cheers

Ben

 

no but theres a guy on here that has hundreds of wheel nuts so you can run group A wheels as i asked this a few days ago

i'll find his name in a min

 

it was wheel nuts i was on about but im sure christian sells the stud kit

https://passionford.com/forum/viewto...133&highlight=

 

I did a group-buy on the stud kit. Might run another if theres enough interest. We don't usually keep them in stock though.

 

I bought a stud kit off ebay £20 quid plus £3 delivery i'd sugest having a look on there.

 

cheers lads, yeah i will need the stud kit, any ideas, cant find them anywhere, none on ebay at the moment.

cheers

Ben

 

burton power sell them

 

burton only sell wheel studs with the teeth on them, they dont fit the standard s2 hubs, there is no teeth on the hubs to lock into

 

these wont fit into the back of the hub

 

I had to drill the thread out of the hubs out at work and used a fly press to press them into so as to make them nice and tight in there.
a local engineering firm should be able to do it for you and i doubt it would cost very much hope that helps mark.

 

what did the studs grip onto and was it secure

cheers mate

 

i bought 16 escort cossie wheel studs from fords for under a fiver, got my drill out, drilled the standard holes hammerd in new studs, hey presto bigger longer studs to run me cossie wheels

 

Yes they do
Have them on mine

Rally and Competition Equipment supplied mine

 

www.rallydesign.co.uk

 

As above, drill out the hub and press the new splined bolt in

GP A are 14mm though so be careful if you do want those as most places only sell the standard 12mm ones

We have the ones above in 12mm for less than £1 each (63mm)

 

right thats ace lads, i will give that a blast.

Nuts rus - would it be possible for you to supply me with 16 of them mate.

cheers

Ben

 

think that would take a couple of months

Mr. Slow

 

Alex - Shut it you

Bam S2 - I will if Christian is not going to do a group buy on them
He posted first

 

Tony, do it, no problems.

 

haha, its oright lads, i will just order them from burton.

cheers for the help everyone

Ben