Hi There

wondering if anyone knows the finis codes for the following:

* Inlet manifold gasket - not the one that goes between head/injectors, but the one that goes between the injectors and the body of the manifold (possibly the same gasket??)

* an injector

* The adjustable screw that goes under the throttle body (idel speed majbe??)

* the oval shaped gasket for a bit on the head, not sure what this is, its a wee metal oval thing that bolts on woth 2 bolts and has a ford badge on it

* again dont know the name of this, but it screws into the front of the head and has a wire with an "0" terminal on it

sorry for the lack of technical names! If I had a decent pic of the engine bay id circle what I was meaning... cheers

Jamie

 

You can get all that from www.burtonpower.com

apart for this dont think they do them

 

cheers mate ill have a look

 

where about on the website mate?
is it just the part number under each individual item? Or is that the burton power part number? cheers

 

Under Engine Components then click on gaskets & seals then cvh and it will come up with all the gasket sets they do for the cvh

 

cheers for that. you dont happen to know what this thing is do you?

* the oval shaped gasket for a bit on the head, not sure what this is, its a wee metal oval thing that bolts on woth 2 bolts and has a ford badge on it

Do you know what the oval thing actually is?
I know its a pretty piss description but I dont want to go into Ford sounding like a total idiot!

cheers again

 

Its a blanking plate for the fuel pump that the carbeurettor models have.

You could easily make a gasket for that with some gasket paper....

 

As above it's just a blanking plate. If i were you id get a complet gasket set then you have all the gaskets you need.


That will be the water temp sensor